]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - drivers/net/smc911x.h
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
[karo-tx-uboot.git] / drivers / net / smc911x.h
index c14003c174f8b51fad7cbc2f0e48b87fd5526078..a290073bb8b42814c8129aba4f25647c3ea93b7f 100644 (file)
 
 #include <linux/types.h>
 
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
-       defined (CONFIG_DRIVER_SMC911X_16_BIT)
-#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
-       CONFIG_DRIVER_SMC911X_16_BIT shall be set"
+#define DRIVERNAME "smc911x"
+
+#if defined (CONFIG_SMC911X_32_BIT) && \
+       defined (CONFIG_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_SMC911X_32_BIT and \
+       CONFIG_SMC911X_16_BIT shall be set"
 #endif
 
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 __smc911x_reg_read(u32 addr)
+#if defined (CONFIG_SMC911X_32_BIT)
+static inline u32 __smc911x_reg_read(struct eth_device *dev, u32 offset)
 {
-       return *(volatile u32*)addr;
+       return *(volatile u32*)(dev->iobase + offset);
 }
-u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
+u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
+       __attribute__((weak, alias("__smc911x_reg_read")));
 
-static inline void __smc911x_reg_write(u32 addr, u32 val)
+static inline void __smc911x_reg_write(struct eth_device *dev,
+                                       u32 offset, u32 val)
 {
-       *(volatile u32*)addr = val;
+       *(volatile u32*)(dev->iobase + offset) = val;
 }
-void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
-#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 smc911x_reg_read(u32 addr)
+void smc911x_reg_write(struct eth_device *dev, u32 offset, u32 val)
+       __attribute__((weak, alias("__smc911x_reg_write")));
+#elif defined (CONFIG_SMC911X_16_BIT)
+static inline u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
 {
-       volatile u16 *addr_16 = (u16 *)addr;
+       volatile u16 *addr_16 = (u16 *)(dev->iobase + offset);
        return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
 }
-static inline void smc911x_reg_write(u32 addr, u32 val)
+static inline void smc911x_reg_write(struct eth_device *dev,
+                                       u32 offset, u32 val)
 {
-       *(volatile u16*)addr = (u16)val;
-       *(volatile u16*)(addr + 2) = (u16)(val >> 16);
+       *(volatile u16 *)(dev->iobase + offset) = (u16)val;
+       *(volatile u16 *)(dev->iobase + offset + 2) = (u16)(val >> 16);
 }
 #else
 #error "SMC911X: undefined bus width"
-#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+#endif /* CONFIG_SMC911X_16_BIT */
 
 /* Below are the register offsets and bit definitions
  * of the Lan911x memory space
  */
-#define RX_DATA_FIFO            (CONFIG_DRIVER_SMC911X_BASE + 0x00)
+#define RX_DATA_FIFO                           0x00
 
-#define TX_DATA_FIFO            (CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_DATA_FIFO                           0x20
 #define        TX_CMD_A_INT_ON_COMP                    0x80000000
 #define        TX_CMD_A_INT_BUF_END_ALGN               0x03000000
 #define        TX_CMD_A_INT_4_BYTE_ALGN                0x00000000
@@ -80,7 +86,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        TX_CMD_B_DISABLE_PADDING                0x00001000
 #define        TX_CMD_B_PKT_BYTE_LENGTH                0x000007FF
 
-#define RX_STATUS_FIFO         (CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STATUS_FIFO                         0x40
 #define        RX_STS_PKT_LEN                          0x3FFF0000
 #define        RX_STS_ES                               0x00008000
 #define        RX_STS_BCST                             0x00002000
@@ -94,8 +100,8 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        RX_STS_MII_ERR                          0x00000008
 #define        RX_STS_DRIBBLING                        0x00000004
 #define        RX_STS_CRC_ERR                          0x00000002
-#define RX_STATUS_FIFO_PEEK    (CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO         (CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define RX_STATUS_FIFO_PEEK                    0x44
+#define TX_STATUS_FIFO                         0x48
 #define        TX_STS_TAG                              0xFFFF0000
 #define        TX_STS_ES                               0x00008000
 #define        TX_STS_LOC                              0x00000800
@@ -106,21 +112,23 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        TX_STS_MANY_DEFER                       0x00000004
 #define        TX_STS_UNDERRUN                         0x00000002
 #define        TX_STS_DEFERRED                         0x00000001
-#define TX_STATUS_FIFO_PEEK    (CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV                 (CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define TX_STATUS_FIFO_PEEK                    0x4C
+#define ID_REV                                 0x50
 #define        ID_REV_CHIP_ID                          0xFFFF0000  /* RO */
 #define        ID_REV_REV_ID                           0x0000FFFF  /* RO */
 
-#define INT_CFG                        (CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG                                        0x54
 #define        INT_CFG_INT_DEAS                        0xFF000000  /* R/W */
 #define        INT_CFG_INT_DEAS_CLR                    0x00004000
 #define        INT_CFG_INT_DEAS_STS                    0x00002000
 #define        INT_CFG_IRQ_INT                         0x00001000  /* RO */
 #define        INT_CFG_IRQ_EN                          0x00000100  /* R/W */
-#define        INT_CFG_IRQ_POL                         0x00000010  /* R/W Not Affected by SW Reset */
-#define        INT_CFG_IRQ_TYPE                        0x00000001  /* R/W Not Affected by SW Reset */
+                                       /* R/W Not Affected by SW Reset */
+#define        INT_CFG_IRQ_POL                         0x00000010
+                                       /* R/W Not Affected by SW Reset */
+#define        INT_CFG_IRQ_TYPE                        0x00000001
 
-#define INT_STS                        (CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS                                        0x58
 #define        INT_STS_SW_INT                          0x80000000  /* R/WC */
 #define        INT_STS_TXSTOP_INT                      0x02000000  /* R/WC */
 #define        INT_STS_RXSTOP_INT                      0x01000000  /* R/WC */
@@ -149,7 +157,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        INT_STS_GPIO2_INT                       0x00000004  /* R/WC */
 #define        INT_STS_GPIO1_INT                       0x00000002  /* R/WC */
 #define        INT_STS_GPIO0_INT                       0x00000001  /* R/WC */
-#define INT_EN                 (CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN                                 0x5C
 #define        INT_EN_SW_INT_EN                        0x80000000  /* R/W */
 #define        INT_EN_TXSTOP_INT_EN                    0x02000000  /* R/W */
 #define        INT_EN_RXSTOP_INT_EN                    0x01000000  /* R/W */
@@ -179,14 +187,14 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        INT_EN_GPIO1_INT                        0x00000002  /* R/W */
 #define        INT_EN_GPIO0_INT                        0x00000001  /* R/W */
 
-#define BYTE_TEST              (CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT               (CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define BYTE_TEST                              0x64
+#define FIFO_INT                               0x68
 #define        FIFO_INT_TX_AVAIL_LEVEL                 0xFF000000  /* R/W */
 #define        FIFO_INT_TX_STS_LEVEL                   0x00FF0000  /* R/W */
 #define        FIFO_INT_RX_AVAIL_LEVEL                 0x0000FF00  /* R/W */
 #define        FIFO_INT_RX_STS_LEVEL                   0x000000FF  /* R/W */
 
-#define RX_CFG                 (CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG                                 0x6C
 #define        RX_CFG_RX_END_ALGN                      0xC0000000  /* R/W */
 #define                RX_CFG_RX_END_ALGN4             0x00000000  /* R/W */
 #define                RX_CFG_RX_END_ALGN16            0x40000000  /* R/W */
@@ -196,16 +204,17 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        RX_CFG_RXDOFF                           0x00001F00  /* R/W */
 /*#define      RX_CFG_RXBAD                    0x00000001*/  /* R/W */
 
-#define TX_CFG                 (CONFIG_DRIVER_SMC911X_BASE + 0x70)
+#define TX_CFG                                 0x70
 /*#define      TX_CFG_TX_DMA_LVL               0xE0000000*/     /* R/W */
-/*#define      TX_CFG_TX_DMA_CNT               0x0FFF0000*/     /* R/W Self Clearing */
+                                                /* R/W Self Clearing */
+/*#define      TX_CFG_TX_DMA_CNT               0x0FFF0000*/
 #define        TX_CFG_TXS_DUMP                         0x00008000  /* Self Clearing */
 #define        TX_CFG_TXD_DUMP                         0x00004000  /* Self Clearing */
 #define        TX_CFG_TXSAO                            0x00000004  /* R/W */
 #define        TX_CFG_TX_ON                            0x00000002  /* R/W */
 #define        TX_CFG_STOP_TX                          0x00000001  /* Self Clearing */
 
-#define HW_CFG                 (CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG                                 0x74
 #define        HW_CFG_TTM                              0x00200000  /* R/W */
 #define        HW_CFG_SF                               0x00100000  /* R/W */
 #define        HW_CFG_TX_FIF_SZ                        0x000F0000  /* R/W */
@@ -221,24 +230,25 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        HW_CFG_SRST_TO                          0x00000002  /* RO */
 #define        HW_CFG_SRST                             0x00000001  /* Self Clearing */
 
-#define RX_DP_CTRL             (CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL                             0x78
 #define        RX_DP_CTRL_RX_FFWD                      0x80000000  /* R/W */
 #define        RX_DP_CTRL_FFWD_BUSY                    0x80000000  /* RO */
 
-#define RX_FIFO_INF            (CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF                            0x7C
 #define         RX_FIFO_INF_RXSUSED                    0x00FF0000  /* RO */
 #define         RX_FIFO_INF_RXDUSED                    0x0000FFFF  /* RO */
 
-#define TX_FIFO_INF            (CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF                            0x80
 #define        TX_FIFO_INF_TSUSED                      0x00FF0000  /* RO */
 #define        TX_FIFO_INF_TDFREE                      0x0000FFFF  /* RO */
 
-#define PMT_CTRL               (CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL                               0x84
 #define        PMT_CTRL_PM_MODE                        0x00003000  /* Self Clearing */
 #define        PMT_CTRL_PHY_RST                        0x00000400  /* Self Clearing */
 #define        PMT_CTRL_WOL_EN                         0x00000200  /* R/W */
 #define        PMT_CTRL_ED_EN                          0x00000100  /* R/W */
-#define        PMT_CTRL_PME_TYPE                       0x00000040  /* R/W Not Affected by SW Reset */
+                                       /* R/W Not Affected by SW Reset */
+#define        PMT_CTRL_PME_TYPE                       0x00000040
 #define        PMT_CTRL_WUPS                           0x00000030  /* R/WC */
 #define        PMT_CTRL_WUPS_NOWAKE                    0x00000000  /* R/WC */
 #define        PMT_CTRL_WUPS_ED                        0x00000010  /* R/WC */
@@ -246,10 +256,11 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        PMT_CTRL_WUPS_MULTI                     0x00000030  /* R/WC */
 #define        PMT_CTRL_PME_IND                        0x00000008  /* R/W */
 #define        PMT_CTRL_PME_POL                        0x00000004  /* R/W */
-#define        PMT_CTRL_PME_EN                         0x00000002  /* R/W Not Affected by SW Reset */
+                                       /* R/W Not Affected by SW Reset */
+#define        PMT_CTRL_PME_EN                         0x00000002
 #define        PMT_CTRL_READY                          0x00000001  /* RO */
 
-#define GPIO_CFG               (CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG                               0x88
 #define        GPIO_CFG_LED3_EN                        0x40000000  /* R/W */
 #define        GPIO_CFG_LED2_EN                        0x20000000  /* R/W */
 #define        GPIO_CFG_LED1_EN                        0x10000000  /* R/W */
@@ -269,23 +280,23 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define        GPIO_CFG_GPIOD1                         0x00000002  /* R/W */
 #define        GPIO_CFG_GPIOD0                         0x00000001  /* R/W */
 
-#define GPT_CFG                        (CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG                                        0x8C
 #define        GPT_CFG_TIMER_EN                        0x20000000  /* R/W */
 #define        GPT_CFG_GPT_LOAD                        0x0000FFFF  /* R/W */
 
-#define GPT_CNT                        (CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT                                        0x90
 #define        GPT_CNT_GPT_CNT                         0x0000FFFF  /* RO */
 
-#define ENDIAN                 (CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN               (CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP                        (CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD            (CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define ENDIAN                                 0x98
+#define FREE_RUN                               0x9C
+#define RX_DROP                                        0xA0
+#define MAC_CSR_CMD                            0xA4
 #define         MAC_CSR_CMD_CSR_BUSY                   0x80000000  /* Self Clearing */
 #define         MAC_CSR_CMD_R_NOT_W                    0x40000000  /* R/W */
 #define         MAC_CSR_CMD_CSR_ADDR                   0x000000FF  /* R/W */
 
-#define MAC_CSR_DATA           (CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG                        (CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define MAC_CSR_DATA                           0xA8
+#define AFC_CFG                                        0xAC
 #define                AFC_CFG_AFC_HI                  0x00FF0000  /* R/W */
 #define                AFC_CFG_AFC_LO                  0x0000FF00  /* R/W */
 #define                AFC_CFG_BACK_DUR                0x000000F0  /* R/W */
@@ -294,7 +305,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define                AFC_CFG_FCADD                   0x00000002  /* R/W */
 #define                AFC_CFG_FCANY                   0x00000001  /* R/W */
 
-#define E2P_CMD                        (CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD                                        0xB0
 #define                E2P_CMD_EPC_BUSY                0x80000000  /* Self Clearing */
 #define                E2P_CMD_EPC_CMD                 0x70000000  /* R/W */
 #define                E2P_CMD_EPC_CMD_READ            0x00000000  /* R/W */
@@ -309,7 +320,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define                E2P_CMD_MAC_ADDR_LOADED         0x00000100  /* RO */
 #define                E2P_CMD_EPC_ADDR                0x000000FF  /* R/W */
 
-#define E2P_DATA               (CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA                               0xB4
 #define        E2P_DATA_EEPROM_DATA                    0x000000FF  /* R/W */
 /* end of LAN register offsets and bit definitions */
 
@@ -373,6 +384,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define WUCSR_MPEN                     0x00000002
 
 /* Chip ID values */
+#define CHIP_89218     0x218a
 #define CHIP_9115      0x115
 #define CHIP_9116      0x116
 #define CHIP_9117      0x117
@@ -382,6 +394,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define CHIP_9216      0x116a
 #define CHIP_9217      0x117a
 #define CHIP_9218      0x118a
+#define CHIP_9220      0x9220
 #define CHIP_9221      0x9221
 
 struct chip_id {
@@ -390,6 +403,7 @@ struct chip_id {
 };
 
 static const struct chip_id chip_ids[] =  {
+       { CHIP_89218, "LAN89218" },
        { CHIP_9115, "LAN9115" },
        { CHIP_9116, "LAN9116" },
        { CHIP_9117, "LAN9117" },
@@ -399,45 +413,47 @@ static const struct chip_id chip_ids[] =  {
        { CHIP_9216, "LAN9216" },
        { CHIP_9217, "LAN9217" },
        { CHIP_9218, "LAN9218" },
+       { CHIP_9220, "LAN9220" },
        { CHIP_9221, "LAN9221" },
        { 0, NULL },
 };
 
-
-#define DRIVERNAME "smc911x"
-
-static u32 smc911x_get_mac_csr(u8 reg)
+static u32 smc911x_get_mac_csr(struct eth_device *dev, u8 reg)
 {
-       while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+       while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
                ;
-       smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
-       while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+       smc911x_reg_write(dev, MAC_CSR_CMD,
+                       MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+       while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
                ;
 
-       return smc911x_reg_read(MAC_CSR_DATA);
+       return smc911x_reg_read(dev, MAC_CSR_DATA);
 }
 
-static void smc911x_set_mac_csr(u8 reg, u32 data)
+static void smc911x_set_mac_csr(struct eth_device *dev, u8 reg, u32 data)
 {
-       while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+       while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
                ;
-       smc911x_reg_write(MAC_CSR_DATA, data);
-       smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
-       while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+       smc911x_reg_write(dev, MAC_CSR_DATA, data);
+       smc911x_reg_write(dev, MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+       while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
                ;
 }
 
-static int smc911x_detect_chip(void)
+static int smc911x_detect_chip(struct eth_device *dev)
 {
        unsigned long val, i;
 
-       val = smc911x_reg_read(BYTE_TEST);
-       if (val != 0x87654321) {
+       val = smc911x_reg_read(dev, BYTE_TEST);
+       if (val == 0xffffffff) {
+               /* Special case -- no chip present */
+               return -1;
+       } else if (val != 0x87654321) {
                printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
                return -1;
        }
 
-       val = smc911x_reg_read(ID_REV) >> 16;
+       val = smc911x_reg_read(dev, ID_REV) >> 16;
        for (i = 0; chip_ids[i].id != 0; i++) {
                if (chip_ids[i].id == val) break;
        }
@@ -446,23 +462,27 @@ static int smc911x_detect_chip(void)
                return -1;
        }
 
-       printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+       dev->priv = (void *)&chip_ids[i];
 
        return 0;
 }
 
-static void smc911x_reset(void)
+static void smc911x_reset(struct eth_device *dev)
 {
        int timeout;
 
-       /* Take out of PM setting first */
-       if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
+       /*
+        *  Take out of PM setting first
+        *  Device is already wake up if PMT_CTRL_READY bit is set
+        */
+       if ((smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) == 0) {
                /* Write to the bytetest will take out of powerdown */
-               smc911x_reg_write(BYTE_TEST, 0x0);
+               smc911x_reg_write(dev, BYTE_TEST, 0x0);
 
                timeout = 10;
 
-               while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
+               while (timeout-- &&
+                       !(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
                        udelay(10);
                if (!timeout) {
                        printf(DRIVERNAME
@@ -472,12 +492,12 @@ static void smc911x_reset(void)
        }
 
        /* Disable interrupts */
-       smc911x_reg_write(INT_EN, 0);
+       smc911x_reg_write(dev, INT_EN, 0);
 
-       smc911x_reg_write(HW_CFG, HW_CFG_SRST);
+       smc911x_reg_write(dev, HW_CFG, HW_CFG_SRST);
 
        timeout = 1000;
-       while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+       while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
                udelay(10);
 
        if (!timeout) {
@@ -486,11 +506,11 @@ static void smc911x_reset(void)
        }
 
        /* Reset the FIFO level and flow control settings */
-       smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
-       smc911x_reg_write(AFC_CFG, 0x0050287F);
+       smc911x_set_mac_csr(dev, FLOW, FLOW_FCPT | FLOW_FCEN);
+       smc911x_reg_write(dev, AFC_CFG, 0x0050287F);
 
        /* Set to LED outputs */
-       smc911x_reg_write(GPIO_CFG, 0x70070000);
+       smc911x_reg_write(dev, GPIO_CFG, 0x70070000);
 }
 
 #endif