sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()

[karo-tx-uboot.git] / drivers / power / axp221.c

diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
index 728727b48eb6a72dc9635ba52fb0e1b08d9e93ac..3e07f23c20c621ba9cbfc101d788462aed93026d 100644 (file)
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -29,9 +29,7 @@ static int pmic_bus_init(void)
 #else
        int ret;
 
-       rsb_init();
-
-       ret = rsb_set_device_mode(AXP223_DEVICE_MODE_DATA);
+       ret = rsb_init();
        if (ret)
                return ret;
 
@@ -302,6 +300,39 @@ int axp221_set_aldo3(unsigned int mvolt)
                              AXP221_OUTPUT_CTRL3_ALDO3_EN);
 }
 
+int axp221_set_eldo(int eldo_num, unsigned int mvolt)
+{
+       int ret;
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+       u8 addr, bits;
+
+       switch (eldo_num) {
+       case 3:
+               addr = AXP221_ELDO3_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO3_EN;
+               break;
+       case 2:
+               addr = AXP221_ELDO2_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO2_EN;
+               break;
+       case 1:
+               addr = AXP221_ELDO1_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO1_EN;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2, bits);
+
+       ret = pmic_bus_write(addr, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL2, bits);
+}
+
 int axp221_init(void)
 {
        /* This cannot be 0 because it is used in SPL before BSS is ready */
@@ -353,3 +384,39 @@ int axp221_get_sid(unsigned int *sid)
 
        return 0;
 }
+
+static int axp_drivebus_setup(void)
+{
+       int ret;
+
+       ret = axp221_init();
+       if (ret)
+               return ret;
+
+       /* Set N_VBUSEN pin to output / DRIVEBUS function */
+       return axp221_clrbits(AXP221_MISC_CTRL, AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+}
+
+int axp_drivebus_enable(void)
+{
+       int ret;
+
+       ret = axp_drivebus_setup();
+       if (ret)
+               return ret;
+
+       /* Set DRIVEBUS high */
+       return axp221_setbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+}
+
+int axp_drivebus_disable(void)
+{
+       int ret;
+
+       ret = axp_drivebus_setup();
+       if (ret)
+               return ret;
+
+       /* Set DRIVEBUS low */
+       return axp221_clrbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+}