* Author: Shlomi Gridish <gridish@freescale.com>
*
* Description: UCC ethernet driver -- PHY handling
- * Driver for UEC on QE
- * Based on 8260_io/fcc_enet.c
+ * Driver for UEC on QE
+ * Based on 8260_io/fcc_enet.c
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
#define MII_end ((u32)-2)
#define MII_read ((u32)-1)
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
-#define UGETH_AN_TIMEOUT 2000
+#define UGETH_AN_TIMEOUT 2000
/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL 0x09
+#define MII_1000BASETCONTROL 0x09
#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
+/* 1000BT status */
+#define MII_1000BASETSTATUS 0x0a
+#define LPA_1000FULL 0x0400
+#define LPA_1000HALF 0x0200
+
/* Cicada Extended Control Register 1 */
-#define MII_CIS8201_EXT_CON1 0x17
+#define MII_CIS8201_EXT_CON1 0x17
#define MII_CIS8201_EXTCON1_INIT 0x0000
/* Cicada Interrupt Mask Register */
-#define MII_CIS8201_IMASK 0x19
-#define MII_CIS8201_IMASK_IEN 0x8000
-#define MII_CIS8201_IMASK_SPEED 0x4000
-#define MII_CIS8201_IMASK_LINK 0x2000
+#define MII_CIS8201_IMASK 0x19
+#define MII_CIS8201_IMASK_IEN 0x8000
+#define MII_CIS8201_IMASK_SPEED 0x4000
+#define MII_CIS8201_IMASK_LINK 0x2000
#define MII_CIS8201_IMASK_DUPLEX 0x1000
-#define MII_CIS8201_IMASK_MASK 0xf000
+#define MII_CIS8201_IMASK_MASK 0xf000
/* Cicada Interrupt Status Register */
-#define MII_CIS8201_ISTAT 0x1a
+#define MII_CIS8201_ISTAT 0x1a
#define MII_CIS8201_ISTAT_STATUS 0x8000
-#define MII_CIS8201_ISTAT_SPEED 0x4000
-#define MII_CIS8201_ISTAT_LINK 0x2000
+#define MII_CIS8201_ISTAT_SPEED 0x4000
+#define MII_CIS8201_ISTAT_LINK 0x2000
#define MII_CIS8201_ISTAT_DUPLEX 0x1000
/* Cicada Auxiliary Control/Status Register */
-#define MII_CIS8201_AUX_CONSTAT 0x1c
+#define MII_CIS8201_AUX_CONSTAT 0x1c
#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
#define MII_CIS8201_AUXCONSTAT_100 0x0008
/* 88E1011 PHY Status Register */
-#define MII_M1011_PHY_SPEC_STATUS 0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
-#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
-
-#define MII_M1011_IEVENT 0x13
-#define MII_M1011_IEVENT_CLEAR 0x0000
-
-#define MII_M1011_IMASK 0x12
-#define MII_M1011_IMASK_INIT 0x6400
-#define MII_M1011_IMASK_CLEAR 0x0000
-
-#define MII_DM9161_SCR 0x10
-#define MII_DM9161_SCR_INIT 0x0610
+#define MII_M1011_PHY_SPEC_STATUS 0x11
+#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
+#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
+#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+/* 88E1111 PHY Register */
+#define MII_M1111_PHY_EXT_CR 0x14
+#define MII_M1111_RX_DELAY 0x80
+#define MII_M1111_TX_DELAY 0x2
+#define MII_M1111_PHY_EXT_SR 0x1b
+#define MII_M1111_HWCFG_MODE_MASK 0xf
+#define MII_M1111_HWCFG_MODE_RGMII 0xb
+
+#define MII_DM9161_SCR 0x10
+#define MII_DM9161_SCR_INIT 0x0610
#define MII_DM9161_SCR_RMII_INIT 0x0710
/* DM9161 Specified Configuration and Status Register */
-#define MII_DM9161_SCSR 0x11
-#define MII_DM9161_SCSR_100F 0x8000
-#define MII_DM9161_SCSR_100H 0x4000
-#define MII_DM9161_SCSR_10F 0x2000
-#define MII_DM9161_SCSR_10H 0x1000
+#define MII_DM9161_SCSR 0x11
+#define MII_DM9161_SCSR_100F 0x8000
+#define MII_DM9161_SCSR_100H 0x4000
+#define MII_DM9161_SCSR_10F 0x2000
+#define MII_DM9161_SCSR_10H 0x1000
/* DM9161 Interrupt Register */
-#define MII_DM9161_INTR 0x15
-#define MII_DM9161_INTR_PEND 0x8000
-#define MII_DM9161_INTR_DPLX_MASK 0x0800
-#define MII_DM9161_INTR_SPD_MASK 0x0400
-#define MII_DM9161_INTR_LINK_MASK 0x0200
-#define MII_DM9161_INTR_MASK 0x0100
-#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
-#define MII_DM9161_INTR_SPD_CHANGE 0x0008
-#define MII_DM9161_INTR_LINK_CHANGE 0x0004
-#define MII_DM9161_INTR_INIT 0x0000
-#define MII_DM9161_INTR_STOP \
+#define MII_DM9161_INTR 0x15
+#define MII_DM9161_INTR_PEND 0x8000
+#define MII_DM9161_INTR_DPLX_MASK 0x0800
+#define MII_DM9161_INTR_SPD_MASK 0x0400
+#define MII_DM9161_INTR_LINK_MASK 0x0200
+#define MII_DM9161_INTR_MASK 0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
+#define MII_DM9161_INTR_SPD_CHANGE 0x0008
+#define MII_DM9161_INTR_LINK_CHANGE 0x0004
+#define MII_DM9161_INTR_INIT 0x0000
+#define MII_DM9161_INTR_STOP \
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
/* DM9161 10BT Configuration/Status */
-#define MII_DM9161_10BTCSR 0x12
-#define MII_DM9161_10BTCSR_INIT 0x7800
+#define MII_DM9161_10BTCSR 0x12
+#define MII_DM9161_10BTCSR_INIT 0x7800
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
- SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | \
- SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | \
- SUPPORTED_TP | \
- SUPPORTED_MII)
+ SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | \
+ SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | \
+ SUPPORTED_TP | \
+ SUPPORTED_MII)
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | \
- SUPPORTED_1000baseT_Full)
+ SUPPORTED_1000baseT_Half | \
+ SUPPORTED_1000baseT_Full)
-#define MII_READ_COMMAND 0x00000001
+#define MII_READ_COMMAND 0x00000001
-#define MII_INTERRUPT_DISABLED 0x0
-#define MII_INTERRUPT_ENABLED 0x1
+#define MII_INTERRUPT_DISABLED 0x0
+#define MII_INTERRUPT_ENABLED 0x1
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
/* Duplex, half or full. */
-#define DUPLEX_HALF 0x00
-#define DUPLEX_FULL 0x01
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half (1 << 0)
-#define SUPPORTED_10baseT_Full (1 << 1)
-#define SUPPORTED_100baseT_Half (1 << 2)
-#define SUPPORTED_100baseT_Full (1 << 3)
-#define SUPPORTED_1000baseT_Half (1 << 4)
-#define SUPPORTED_1000baseT_Full (1 << 5)
-#define SUPPORTED_Autoneg (1 << 6)
-#define SUPPORTED_TP (1 << 7)
-#define SUPPORTED_AUI (1 << 8)
-#define SUPPORTED_MII (1 << 9)
-#define SUPPORTED_FIBRE (1 << 10)
-#define SUPPORTED_BNC (1 << 11)
-#define SUPPORTED_10000baseT_Full (1 << 12)
-
-#define ADVERTISED_10baseT_Half (1 << 0)
-#define ADVERTISED_10baseT_Full (1 << 1)
-#define ADVERTISED_100baseT_Half (1 << 2)
-#define ADVERTISED_100baseT_Full (1 << 3)
-#define ADVERTISED_1000baseT_Half (1 << 4)
-#define ADVERTISED_1000baseT_Full (1 << 5)
-#define ADVERTISED_Autoneg (1 << 6)
-#define ADVERTISED_TP (1 << 7)
-#define ADVERTISED_AUI (1 << 8)
-#define ADVERTISED_MII (1 << 9)
-#define ADVERTISED_FIBRE (1 << 10)
-#define ADVERTISED_BNC (1 << 11)
-#define ADVERTISED_10000baseT_Full (1 << 12)
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_RESV 0x1c00 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_RESV 0x1c00 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
+ ADVERTISE_CSMA)
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
/* Taken from mii_if_info and sungem_phy.h */
struct uec_mii_info {
- /* Information about the PHY type */
- /* And management functions */
- struct phy_info *phyinfo;
+ /* Information about the PHY type */
+ /* And management functions */
+ struct phy_info *phyinfo;
- struct eth_device *dev;
+ struct eth_device *dev;
- /* forced speed & duplex (no autoneg)
- * partner speed & duplex & pause (autoneg)
- */
- int speed;
- int duplex;
- int pause;
+ /* forced speed & duplex (no autoneg)
+ * partner speed & duplex & pause (autoneg)
+ */
+ int speed;
+ int duplex;
+ int pause;
- /* The most recently read link state */
- int link;
+ /* The most recently read link state */
+ int link;
- /* Enabled Interrupts */
- u32 interrupts;
+ /* Enabled Interrupts */
+ u32 interrupts;
- u32 advertising;
- int autoneg;
- int mii_id;
+ u32 advertising;
+ int autoneg;
+ int mii_id;
- /* private data pointer */
- /* For use by PHYs to maintain extra state */
- void *priv;
+ /* private data pointer */
+ /* For use by PHYs to maintain extra state */
+ void *priv;
- /* Provided by ethernet driver */
- int (*mdio_read) (struct eth_device *dev, int mii_id, int reg);
- void (*mdio_write) (struct eth_device *dev, int mii_id, int reg, int val);
+ /* Provided by ethernet driver */
+ int (*mdio_read) (struct eth_device * dev, int mii_id, int reg);
+ void (*mdio_write) (struct eth_device * dev, int mii_id, int reg,
+ int val);
};
/* struct phy_info: a structure which defines attributes for a PHY
* Each PHY must declare config_aneg, and read_status.
*/
struct phy_info {
- u32 phy_id;
- char *name;
- unsigned int phy_id_mask;
- u32 features;
+ u32 phy_id;
+ char *name;
+ unsigned int phy_id_mask;
+ u32 features;
- /* Called to initialize the PHY */
- int (*init)(struct uec_mii_info *mii_info);
+ /* Called to initialize the PHY */
+ int (*init) (struct uec_mii_info * mii_info);
- /* Called to suspend the PHY for power */
- int (*suspend)(struct uec_mii_info *mii_info);
+ /* Called to suspend the PHY for power */
+ int (*suspend) (struct uec_mii_info * mii_info);
- /* Reconfigures autonegotiation (or disables it) */
- int (*config_aneg)(struct uec_mii_info *mii_info);
+ /* Reconfigures autonegotiation (or disables it) */
+ int (*config_aneg) (struct uec_mii_info * mii_info);
- /* Determines the negotiated speed and duplex */
- int (*read_status)(struct uec_mii_info *mii_info);
+ /* Determines the negotiated speed and duplex */
+ int (*read_status) (struct uec_mii_info * mii_info);
- /* Clears any pending interrupts */
- int (*ack_interrupt)(struct uec_mii_info *mii_info);
+ /* Clears any pending interrupts */
+ int (*ack_interrupt) (struct uec_mii_info * mii_info);
- /* Enables or disables interrupts */
- int (*config_intr)(struct uec_mii_info *mii_info);
+ /* Enables or disables interrupts */
+ int (*config_intr) (struct uec_mii_info * mii_info);
- /* Clears up any memory if needed */
- void (*close)(struct uec_mii_info *mii_info);
+ /* Clears up any memory if needed */
+ void (*close) (struct uec_mii_info * mii_info);
};
-struct phy_info *get_phy_info(struct uec_mii_info *mii_info);
-void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value);
-int read_phy_reg(struct eth_device *dev, int mii_id, int regnum);
-void mii_clear_phy_interrupt(struct uec_mii_info *mii_info);
-void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts);
+struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info);
+void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
+ int value);
+int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
+void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
+void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
+ u32 interrupts);
#endif /* __UEC_PHY_H__ */
projects / karo-tx-uboot.git / blobdiff