Update from 2013.01 to 2013.07

[karo-tx-uboot.git] / drivers / serial / stmp3xxx_dbguart.c

diff --git a/drivers/serial/stmp3xxx_dbguart.c b/drivers/serial/stmp3xxx_dbguart.c
deleted file mode 100644 (file)
index 1d24da8..0000000
--- a/drivers/serial/stmp3xxx_dbguart.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <common.h>
-
-#ifdef CONFIG_STMP3XXX_DBGUART
-
-#include "stmp3xxx_dbguart.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Set baud rate. The settings are always 8n1:
- * 8 data bits, no parity, 1 stop bit
- */
-void serial_setbrg(void)
-{
-       u32 cr, lcr_h;
-       u32 quot;
-
-       /* Disable everything */
-       cr = REG_RD(DBGUART_BASE + UARTDBGCR);
-       REG_WR(DBGUART_BASE + UARTDBGCR, 0);
-
-       /* Calculate and set baudrate */
-       quot = (CONFIG_DBGUART_CLK * 4) / gd->baudrate;
-       REG_WR(DBGUART_BASE + UARTDBGFBRD, quot & 0x3f);
-       REG_WR(DBGUART_BASE + UARTDBGIBRD, quot >> 6);
-
-       /* Set 8n1 mode, enable FIFOs */
-       lcr_h = WLEN8 | FEN;
-       REG_WR(DBGUART_BASE + UARTDBGLCR_H, lcr_h);
-
-       /* Enable Debug UART */
-       REG_WR(DBGUART_BASE + UARTDBGCR, cr);
-}
-
-int serial_init(void)
-{
-       u32 cr;
-
-       /* Disable UART */
-       REG_WR(DBGUART_BASE + UARTDBGCR, 0);
-
-       /* Mask interrupts */
-       REG_WR(DBGUART_BASE + UARTDBGIMSC, 0);
-
-       /* Set default baudrate */
-       serial_setbrg();
-
-       /* Enable UART */
-       cr = TXE | RXE | UARTEN;
-       REG_WR(DBGUART_BASE + UARTDBGCR, cr);
-
-       return 0;
-}
-
-/* Send a character */
-void serial_putc(const char c)
-{
-       /* Wait for room in TX FIFO */
-       while (REG_RD(DBGUART_BASE + UARTDBGFR) & TXFF)
-               ;
-
-       /* Write the data byte */
-       REG_WR(DBGUART_BASE + UARTDBGDR, c);
-
-       if (c == '\n')
-               serial_putc('\r');
-}
-
-void serial_puts(const char *s)
-{
-       while (*s) {
-               serial_putc(*s++);
-       }
-}
-
-/* Test whether a character is in TX buffer */
-int serial_tstc(void)
-{
-       /* Check if RX FIFO is not empty */
-       return !(REG_RD(DBGUART_BASE + UARTDBGFR) & RXFE);
-}
-
-/* Receive character */
-int serial_getc(void)
-{
-       /* Wait while TX FIFO is empty */
-       while (REG_RD(DBGUART_BASE + UARTDBGFR) & RXFE)
-               ;
-
-       /* Read data byte */
-       return REG_RD(DBGUART_BASE + UARTDBGDR) & 0xff;
-}
-
-#endif /* CONFIG_STMP378X_DBGUART */