#define USBCTRL_OTGBASE_OFFSET 0x600
-#ifdef CONFIG_MX25
-#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6)
-#define MX25_USB_CTRL_HSTD_BIT (1<<5)
-#define MX25_USB_CTRL_USBTE_BIT (1<<4)
-#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3)
-#endif
+#define MX25_OTG_SIC_SHIFT 29
+#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT (1 << 24)
+#define MX25_OTG_PP_BIT (1 << 11)
+#define MX25_OTG_OCPOL_BIT (1 << 3)
+
+#define MX25_H1_SIC_SHIFT 21
+#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT (1 << 18)
+#define MX25_H1_PM_BIT (1 << 16)
+#define MX25_H1_IPPUE_UP_BIT (1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX25_H1_TLL_BIT (1 << 5)
+#define MX25_H1_USBTE_BIT (1 << 4)
+#define MX25_H1_OCPOL_BIT (1 << 2)
-#ifdef CONFIG_MX31
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
-#endif
+
+#define MX35_OTG_SIC_SHIFT 29
+#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT (1 << 24)
+#define MX35_OTG_PP_BIT (1 << 11)
+#define MX35_OTG_OCPOL_BIT (1 << 3)
+
+#define MX35_H1_SIC_SHIFT 21
+#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT (1 << 18)
+#define MX35_H1_PM_BIT (1 << 16)
+#define MX35_H1_IPPUE_UP_BIT (1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX35_H1_TLL_BIT (1 << 5)
+#define MX35_H1_USBTE_BIT (1 << 4)
+#define MX35_H1_OCPOL_BIT (1 << 2)
static int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
-#ifdef CONFIG_MX25
- v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT |
- MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT;
-#endif
+ v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+#if defined(CONFIG_MX25)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+ MX25_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-#ifdef CONFIG_MX31
- v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_OTG_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_OTG_PM_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT |
- MX31_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_H1_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT |
- MX31_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_H2_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-#endif
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+ MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+ MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
+ MX25_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX25_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX25_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX25_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX25_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX31)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_OTG_PM_BIT;
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H1_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H1_DT_BIT;
+
+ break;
+ case 2: /* H2 port */
+ v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H2_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H2_DT_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX35)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+ MX35_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+ MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT |
+ MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT |
+ MX35_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX35_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX35_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX35_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX35_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#else
+#error MXC EHCI USB driver not supported on this platform
+#endif
writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+
return 0;
}
udelay(80);
ehci = (struct usb_ehci *)(IMX_USB_BASE +
- (0x200 * CONFIG_MXC_USB_PORT));
+ IMX_USB_PORT_OFFSET * CONFIG_MXC_USB_PORT);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
+#ifdef CONFIG_MX35
+ /* Workaround for ENGcm11601 */
+ __raw_writel(0, &ehci->sbuscfg);
+#endif
udelay(10000);
projects / karo-tx-uboot.git / blobdiff