Merge 'u-boot-atmel/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / drivers / usb / musb / musb_core.h

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f9da3f0b29b28766c37ee468ba917a52124d466b..ec8a038c74c10e08383b6854729ad72231049eaa 100644 (file)
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -34,13 +34,47 @@
 #ifndef __MUSB_HDRC_DEFS_H__
 #define __MUSB_HDRC_DEFS_H__
 
-#include <usb.h>
 #include <usb_defs.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_USB_BLACKFIN
+# include "blackfin_usb.h"
+#endif
+
 #define MUSB_EP0_FIFOSIZE      64      /* This is non-configurable */
 
+/* EP0 */
+struct musb_ep0_regs {
+       u16     reserved4;
+       u16     csr0;
+       u16     reserved5;
+       u16     reserved6;
+       u16     count0;
+       u8      host_type0;
+       u8      host_naklimit0;
+       u8      reserved7;
+       u8      reserved8;
+       u8      reserved9;
+       u8      configdata;
+};
+
+/* EP 1-15 */
+struct musb_epN_regs {
+       u16     txmaxp;
+       u16     txcsr;
+       u16     rxmaxp;
+       u16     rxcsr;
+       u16     rxcount;
+       u8      txtype;
+       u8      txinterval;
+       u8      rxtype;
+       u8      rxinterval;
+       u8      reserved0;
+       u8      fifosize;
+};
+
 /* Mentor USB core register overlay structure */
+#ifndef musb_regs
 struct musb_regs {
        /* common registers */
        u8      faddr;
@@ -77,7 +111,10 @@ struct musb_regs {
        u16     rxfifoadd;
        u32     vcontrol;
        u16     hwvers;
-       u16     reserved2[5];
+       u16     reserved2a[1];
+       u8      ulpi_busctl;
+       u8      reserved2b[1];
+       u16     reserved2[3];
        u8      epinfo;
        u8      raminfo;
        u8      linkinfo;
@@ -97,7 +134,18 @@ struct musb_regs {
                u8      rxhubaddr;
                u8      rxhubport;
        } tar[16];
-} __attribute__((aligned(32)));
+       /*
+        * endpoint registers
+        * ep0 elements are valid when array index is 0
+        * otherwise epN is valid
+        */
+       union musb_ep_regs {
+               struct musb_ep0_regs ep0;
+               struct musb_epN_regs epN;
+       } ep[16];
+
+} __attribute__((packed));
+#endif
 
 /*
  * MUSB Register bits
@@ -135,6 +183,10 @@ struct musb_regs {
 #define MUSB_DEVCTL_HR         0x02
 #define MUSB_DEVCTL_SESSION    0x01
 
+/* ULPI VBUSCONTROL */
+#define ULPI_USE_EXTVBUS       0x01
+#define ULPI_USE_EXTVBUSIND    0x02
+
 /* TESTMODE */
 #define MUSB_TEST_FORCE_HOST   0x80
 #define MUSB_TEST_FIFO_ACCESS  0x40
@@ -295,6 +347,7 @@ struct musb_config {
        struct  musb_regs       *regs;
        u32                     timeout;
        u8                      musb_speed;
+       u8                      extvbus;
 };
 
 /* externally defined data */
@@ -303,8 +356,40 @@ extern struct musb_regs            *musbr;
 
 /* exported functions */
 extern void musb_start(void);
-extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
+extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt);
 extern void write_fifo(u8 ep, u32 length, void *fifo_data);
 extern void read_fifo(u8 ep, u32 length, void *fifo_data);
 
+#if defined(CONFIG_USB_BLACKFIN)
+/* Every USB register is accessed as a 16-bit even if the value itself
+ * is only 8-bits in size.  Fun stuff.
+ */
+# undef  readb
+# define readb(addr)     (u8)bfin_read16(addr)
+# undef  writeb
+# define writeb(b, addr) bfin_write16(addr, b)
+# undef MUSB_TXCSR_MODE /* not supported */
+# define MUSB_TXCSR_MODE 0
+/*
+ * The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
+ * However, it has no ULPI support - so there are no registers at all.
+ * That means accesses to ULPI_BUSCONTROL have to be abstracted away.
+ */
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{
+       return 0;
+}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{}
+#else
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{
+       return readb(&musbr->ulpi_busctl);
+}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{
+       writeb(val, &musbr->ulpi_busctl);
+}
+#endif
+
 #endif /* __MUSB_HDRC_DEFS_H__ */