karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / ahci.h

diff --git a/include/ahci.h b/include/ahci.h
index 1940eea630e94769914964e5ba652c7d5c2669c4..2cc8039c3bde4dd9fa24dd3fa51974ab55e9593f 100644 (file)
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -1,7 +1,4 @@
 /*
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- * Terry Lv <r65388@freescale.com>
- *
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
  * Author: Jason Jin<Jason.jin@freescale.com>
  *         Zhang Wei<wei.zhang@freescale.com>
@@ -15,7 +12,6 @@
 
 #define AHCI_PCI_BAR           0x24
 #define AHCI_MAX_SG            56 /* hardware max is 64K */
-#define AHCI_MAX_CMD_SLOT      32
 #define AHCI_CMD_SLOT_SZ       32
 #define AHCI_MAX_CMD_SLOT      32
 #define AHCI_RX_FIS_SZ         256
@@ -62,6 +58,10 @@
 #define PORT_SCR_ERR           0x30 /* SATA phy register: SError */
 #define PORT_SCR_ACT           0x34 /* SATA phy register: SActive */
 
+#ifdef CONFIG_SUNXI_AHCI
+#define PORT_P0DMACR           0x70 /* SUNXI specific "DMA register" */
+#endif
+
 /* PORT_IRQ_{STAT,MASK} bits */
 #define PORT_IRQ_COLD_PRES     (1 << 31) /* cold presence detect */
 #define PORT_IRQ_TF_ERR                (1 << 30) /* task file error */
@@ -91,6 +91,11 @@
                                | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \
                                | PORT_IRQ_D2H_REG_FIS
 
+/* PORT_SCR_STAT bits */
+#define PORT_SCR_STAT_DET_MASK 0x3
+#define PORT_SCR_STAT_DET_COMINIT 0x1
+#define PORT_SCR_STAT_DET_PHYRDY 0x3
+
 /* PORT_CMD bits */
 #define PORT_CMD_ATAPI         (1 << 24) /* Device is ATAPI */
 #define PORT_CMD_LIST_ON       (1 << 15) /* cmd list DMA engine running */
@@ -107,29 +112,6 @@
 
 #define AHCI_MAX_PORTS         32
 
-/* SETFEATURES stuff */
-#define SETFEATURES_XFER       0x03
-#define XFER_UDMA_7            0x47
-#define XFER_UDMA_6            0x46
-#define XFER_UDMA_5            0x45
-#define XFER_UDMA_4            0x44
-#define XFER_UDMA_3            0x43
-#define XFER_UDMA_2            0x42
-#define XFER_UDMA_1            0x41
-#define XFER_UDMA_0            0x40
-#define XFER_MW_DMA_2          0x22
-#define XFER_MW_DMA_1          0x21
-#define XFER_MW_DMA_0          0x20
-#define XFER_SW_DMA_2          0x12
-#define XFER_SW_DMA_1          0x11
-#define XFER_SW_DMA_0          0x10
-#define XFER_PIO_4             0x0C
-#define XFER_PIO_3             0x0B
-#define XFER_PIO_2             0x0A
-#define XFER_PIO_1             0x09
-#define XFER_PIO_0             0x08
-#define XFER_PIO_SLOW          0x00
-
 #define ATA_FLAG_SATA          (1 << 3)
 #define ATA_FLAG_NO_LEGACY     (1 << 4) /* no legacy mode check */
 #define ATA_FLAG_MMIO          (1 << 6) /* use MMIO, not PIO */
@@ -153,12 +135,12 @@ struct ahci_sg {
 };
 
 struct ahci_ioports {
-       u32     cmd_addr;
-       u32     scr_addr;
-       u32     port_mmio;
+       void __iomem    *cmd_addr;
+       void __iomem    *scr_addr;
+       void __iomem    *port_mmio;
        struct ahci_cmd_hdr     *cmd_slot;
        struct ahci_sg          *cmd_tbl_sg;
-       u32     cmd_tbl;
+       ulong   cmd_tbl;
        u32     rx_fis;
 };
 
@@ -169,8 +151,8 @@ struct ahci_probe_ent {
        u32     hard_port_no;
        u32     host_flags;
        u32     host_set_flags;
-       u32     mmio_base;
-       u32     pio_mask;
+       void __iomem *mmio_base;
+       u32     pio_mask;
        u32     udma_mask;
        u32     flags;
        u32     cap;    /* cache of HOST_CAP register */
@@ -178,6 +160,7 @@ struct ahci_probe_ent {
        u32     link_port_map; /*linkup port map*/
 };
 
-int ahci_init(u32 base);
+int ahci_init(void __iomem *base);
+int ahci_reset(void __iomem *base);
 
 #endif