dm: core: allow device_bind() to not return a device pointer

[karo-tx-uboot.git] / include / asm-generic / u-boot.h

diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index a4bfdac18e0844bf0ce6c5ada3181c1de162e51d..9f3351d602e86442cb1a302e37d275fe0aeec8ed 100644 (file)
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -4,21 +4,7 @@
  * (C) Copyright 2000 - 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  ********************************************************************
  * NOTE: This header file defines an interface to U-Boot. Including
  * this (unmodified) header file in another file is considered normal
@@ -46,16 +32,20 @@ typedef struct bd_info {
        unsigned long   bi_flashoffset; /* reserved area for startup monitor */
        unsigned long   bi_sramstart;   /* start of SRAM memory */
        unsigned long   bi_sramsize;    /* size  of SRAM memory */
+#ifdef CONFIG_AVR32
+       unsigned char   bi_phy_id[4];   /* PHY address for ATAG_ETHERNET */
+       unsigned long   bi_board_number;/* ATAG_BOARDINFO */
+#endif
 #ifdef CONFIG_ARM
        unsigned long   bi_arm_freq; /* arm frequency */
        unsigned long   bi_dsp_freq; /* dsp core frequency */
        unsigned long   bi_ddr_freq; /* ddr frequency */
 #endif
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) \
        || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
        unsigned long   bi_immr_base;   /* base of IMMR register */
 #endif
-#if defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
        unsigned long   bi_mbar_base;   /* base of internal registers */
 #endif
 #if defined(CONFIG_MPC83xx)
@@ -76,14 +66,17 @@ typedef struct bd_info {
 #if defined(CONFIG_MPC512X)
        unsigned long   bi_ipsfreq;     /* IPS Bus Freq, in MHz */
 #endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K)
        unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
        unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
 #endif
-       unsigned int    bi_baudrate;    /* Console Baudrate */
+#if defined(CONFIG_EXTRA_CLOCK)
+       unsigned long bi_inpfreq;       /* input Freq in MHz */
+       unsigned long bi_vcofreq;       /* vco Freq in MHz */
+       unsigned long bi_flbfreq;       /* Flexbus Freq in MHz */
+#endif
 #if defined(CONFIG_405)   || \
                defined(CONFIG_405GP) || \
-               defined(CONFIG_405CR) || \
                defined(CONFIG_405EP) || \
                defined(CONFIG_405EZ) || \
                defined(CONFIG_405EX) || \
@@ -95,9 +88,6 @@ typedef struct bd_info {
        unsigned int    bi_pci_busfreq; /* PCI Bus speed, in Hz */
        unsigned char   bi_pci_enetaddr[6];     /* PCI Ethernet MAC address */
 #endif
-#if defined(CONFIG_HYMOD)
-       hymod_conf_t    bi_hymod_conf;  /* hymod configuration information */
-#endif
 
 #ifdef CONFIG_HAS_ETH1
        unsigned char   bi_enet1addr[6];        /* OLD: see README.enetaddr */
@@ -123,9 +113,6 @@ typedef struct bd_info {
        unsigned int    bi_opbfreq;             /* OPB clock in Hz */
        int             bi_iic_fast[2];         /* Use fast i2c mode */
 #endif
-#if defined(CONFIG_NX823)
-       unsigned char   bi_sernum[8];
-#endif
 #if defined(CONFIG_4xx)
 #if defined(CONFIG_440GX) || \
                defined(CONFIG_460EX) || defined(CONFIG_460GT)
@@ -143,8 +130,8 @@ typedef struct bd_info {
        ulong           bi_boot_params; /* where this board expects params */
 #ifdef CONFIG_NR_DRAM_BANKS
        struct {                        /* RAM configuration */
-               ulong start;
-               ulong size;
+               phys_addr_t start;
+               phys_size_t size;
        } bi_dram[CONFIG_NR_DRAM_BANKS];
 #endif /* CONFIG_NR_DRAM_BANKS */
 } bd_t;