Replace enums in ata.h with an include of libata.h

[karo-tx-uboot.git] / include / ata.h

diff --git a/include/ata.h b/include/ata.h
index aa6e90d4702e710a0ed8a0d45092bcb30ac8f0ea..b669423bb0d1dd87b168b6b09db057c20ce090a8 100644 (file)
--- a/include/ata.h
+++ b/include/ata.h
@@ -33,6 +33,8 @@
 #ifndef        _ATA_H
 #define _ATA_H
 
+#include <libata.h>
+
 /* Register addressing depends on the hardware design; for instance,
  * 8-bit (register) and 16-bit (data) accesses might use different
  * address spaces. This is implemented by the following definitions.
@@ -83,66 +85,6 @@
 #define ATA_DEVICE(x)  ((x & 1)<<4)
 #define ATA_LBA                0xE0
 
-enum {
-       ATA_MAX_DEVICES = 1,    /* per bus/port */
-       ATA_MAX_PRD = 256,      /* we could make these 256/256 */
-       ATA_SECT_SIZE = 256,    /*256 words per sector */
-
-       /* bits in ATA command block registers */
-       ATA_HOB = (1 << 7),     /* LBA48 selector */
-       ATA_NIEN = (1 << 1),    /* disable-irq flag */
-       /*ATA_LBA                 = (1 << 6), */ /* LBA28 selector */
-       ATA_DEV1 = (1 << 4),    /* Select Device 1 (slave) */
-       ATA_DEVICE_OBS = (1 << 7) | (1 << 5),   /* obs bits in dev reg */
-       ATA_DEVCTL_OBS = (1 << 3),      /* obsolete bit in devctl reg */
-       ATA_BUSY = (1 << 7),    /* BSY status bit */
-       ATA_DRDY = (1 << 6),    /* device ready */
-       ATA_DF = (1 << 5),      /* device fault */
-       ATA_DRQ = (1 << 3),     /* data request i/o */
-       ATA_ERR = (1 << 0),     /* have an error */
-       ATA_SRST = (1 << 2),    /* software reset */
-       ATA_ABORTED = (1 << 2), /* command aborted */
-       /* ATA command block registers */
-       ATA_REG_DATA = 0x00,
-       ATA_REG_ERR = 0x01,
-       ATA_REG_NSECT = 0x02,
-       ATA_REG_LBAL = 0x03,
-       ATA_REG_LBAM = 0x04,
-       ATA_REG_LBAH = 0x05,
-       ATA_REG_DEVICE = 0x06,
-       ATA_REG_STATUS = 0x07,
-       ATA_PCI_CTL_OFS = 0x02,
-       /* and their aliases */
-       ATA_REG_FEATURE = ATA_REG_ERR,
-       ATA_REG_CMD = ATA_REG_STATUS,
-       ATA_REG_BYTEL = ATA_REG_LBAM,
-       ATA_REG_BYTEH = ATA_REG_LBAH,
-       ATA_REG_DEVSEL = ATA_REG_DEVICE,
-       ATA_REG_IRQ = ATA_REG_NSECT,
-
-       /* SETFEATURES stuff */
-       SETFEATURES_XFER = 0x03,
-       XFER_UDMA_7 = 0x47,
-       XFER_UDMA_6 = 0x46,
-       XFER_UDMA_5 = 0x45,
-       XFER_UDMA_4 = 0x44,
-       XFER_UDMA_3 = 0x43,
-       XFER_UDMA_2 = 0x42,
-       XFER_UDMA_1 = 0x41,
-       XFER_UDMA_0 = 0x40,
-       XFER_MW_DMA_2 = 0x22,
-       XFER_MW_DMA_1 = 0x21,
-       XFER_MW_DMA_0 = 0x20,
-       XFER_PIO_4 = 0x0C,
-       XFER_PIO_3 = 0x0B,
-       XFER_PIO_2 = 0x0A,
-       XFER_PIO_1 = 0x09,
-       XFER_PIO_0 = 0x08,
-       XFER_SW_DMA_2 = 0x12,
-       XFER_SW_DMA_1 = 0x11,
-       XFER_SW_DMA_0 = 0x10,
-       XFER_PIO_SLOW = 0x00
-};
 /*
  * ATA Commands (only mandatory commands listed here)
  */