*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#define CONFIG_CPCI750 1 /* this is an CPCI750 board */
-#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */
+#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */
#undef CONFIG_ECC /* enable ECC support */
* for your console driver.
*
* what to do:
- * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
+ * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
* cable onto the second DUART channel, change the CFG_DUART port from 1
* to 0 below.
*
* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
*/
-#define CONFIG_MPSC
+#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 0
/* to change the default ethernet port, use this define (options: 0, 1, 2) */
#define CONFIG_NET_MULTI
-#define MV_ETH_DEVS 1
+#define MV_ETH_DEVS 1
#define CONFIG_ETHER_PORT 0
#undef CONFIG_ETHER_PORT_MII /* use RMII */
#define CONFIG_SERIAL "AA000001"
#define CONFIG_SERVERIP "10.0.0.79"
-#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s"
+#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s"
#define CONFIG_TESTDRAMDATA y
-#define CONFIG_TESTDRAMADDRESS n
+#define CONFIG_TESTDRAMADDRESS n
#define CONFIG_TESETDRAMWALK n
/* ----------------------------------------------------------------------------- */
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_ALTIVEC /* undef to disable */
+#undef CONFIG_ALTIVEC /* undef to disable */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_ASKENV \
- | CFG_CMD_I2C \
+ | CFG_CMD_I2C \
| CFG_CMD_CACHE \
| CFG_CMD_EEPROM \
- | CFG_CMD_PCI \
+ | CFG_CMD_PCI \
| CFG_CMD_ELF \
| CFG_CMD_DATE \
- | CFG_CMD_NET \
- | CFG_CMD_PING \
- | CFG_CMD_IDE \
- | CFG_CMD_FAT \
- | CFG_CMD_EXT2 \
+ | CFG_CMD_NET \
+ | CFG_CMD_PING \
+ | CFG_CMD_IDE \
+ | CFG_CMD_FAT \
+ | CFG_CMD_EXT2 \
)
#define CONFIG_DOS_PARTITION
#define CONFIG_USE_CPCIDVI
-#ifdef CONFIG_USE_CPCIDVI
+#ifdef CONFIG_USE_CPCIDVI
#define CONFIG_VIDEO
#define CONFIG_VIDEO_CT69000
#define CONFIG_CFB_CONSOLE
*/
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED 80000 /* I2C speed default */
+#define CFG_I2C_SPEED 80000 /* I2C speed default */
#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
/*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */
/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
-/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */
+/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */
/*
#define CFG_DRAM_TEST
* CFG_DRAM_TEST - enables the following tests.
*
* CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
- * Environment variable 'test_dram_data' must be
- * set to 'y'.
+ * Environment variable 'test_dram_data' must be
+ * set to 'y'.
* CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- * addressable. Environment variable
- * 'test_dram_address' must be set to 'y'.
+ * addressable. Environment variable
+ * 'test_dram_address' must be set to 'y'.
* CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- * This test takes about 6 minutes to test 64 MB.
- * Environment variable 'test_dram_walk' must be
- * set to 'y'.
+ * This test takes about 6 minutes to test 64 MB.
+ * Environment variable 'test_dram_walk' must be
+ * set to 'y'.
*/
#define CFG_DRAM_TEST
#if defined(CFG_DRAM_TEST)
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
/*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */
-#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
#define CFG_DRAM_TEST_DATA
#define CFG_DRAM_TEST_ADDRESS
#define CFG_DRAM_TEST_WALK
#define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */
#undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */
-#define CFG_LOAD_ADDR 0x00300000 /* default load address */
+#define CFG_LOAD_ADDR 0x00300000 /* default load address */
-#define CFG_HZ 1000 /* decr freq: 1ms ticks */
-#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
#define CFG_BUS_CLK CFG_BUS_HZ
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
* To an unused memory region. The stack will remain in cache until RAM
* is initialized
*/
-#undef CFG_INIT_RAM_LOCK
+#undef CFG_INIT_RAM_LOCK
/* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */
/* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */
#define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */
#define RELOCATE_INTERNAL_RAM_ADDR
#ifdef RELOCATE_INTERNAL_RAM_ADDR
-/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/
+/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/
#define CFG_INTERNAL_RAM_ADDR 0xf1080000
#endif
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
/* Dummies for BAT 4-7 */
-#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */
-#define CFG_SDRAM2_BASE 0x20000000
-#define CFG_SDRAM3_BASE 0x30000000
-#define CFG_SDRAM4_BASE 0x40000000
+#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */
+#define CFG_SDRAM2_BASE 0x20000000
+#define CFG_SDRAM3_BASE 0x30000000
+#define CFG_SDRAM4_BASE 0x40000000
#define CFG_RESET_ADDRESS 0xfff00100
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE 0xfff00000
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */
/*-----------------------------------------------------------------------
* FLASH related
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */
+#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */
#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */
-#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \
- CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \
- CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \
- CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
-#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
+#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \
+ CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \
+ CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \
+ CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
+#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
/* areas to map different things with the GT in physical space */
#define CFG_DRAM_BANKS 4
/* Peripheral Device section */
/*******************************************************/
-/* We have on the cpci750 Board : */
-/* GT-Chipset Register Area */
-/* GT-Chipset internal SRAM 256k */
-/* SRAM on external device module */
-/* Real time clock on external device module */
-/* dobble UART on external device module */
-/* Data flash on external device module */
-/* Boot flash on external device module */
+/* We have on the cpci750 Board : */
+/* GT-Chipset Register Area */
+/* GT-Chipset internal SRAM 256k */
+/* SRAM on external device module */
+/* Real time clock on external device module */
+/* dobble UART on external device module */
+/* Data flash on external device module */
+/* Boot flash on external device module */
/*******************************************************/
#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */
+#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */
-#undef MARVEL_STANDARD_CFG
-#ifndef MARVEL_STANDARD_CFG
+#undef MARVEL_STANDARD_CFG
+#ifndef MARVEL_STANDARD_CFG
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
#define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */
/*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */
#define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */
#define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */
-#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */
-#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */
-#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */
-#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */
-#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */
+#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */
+#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */
+#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */
+#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */
+#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
#endif
#define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */
#define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */
#define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */
-#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */
+#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */
#define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */
- /* c 4 a 8 2 4 1 c */
- /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
+ /* c 4 a 8 2 4 1 c */
+ /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */
/* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */
/* MPP Control MV64360 Appendix P P. 632*/
-#define CFG_MPP_CONTROL_0 0x00002222 /* */
-#define CFG_MPP_CONTROL_1 0x11110000 /* */
-#define CFG_MPP_CONTROL_2 0x11111111 /* */
-#define CFG_MPP_CONTROL_3 0x00001111 /* */
-/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */
+#define CFG_MPP_CONTROL_0 0x00002222 /* */
+#define CFG_MPP_CONTROL_1 0x11110000 /* */
+#define CFG_MPP_CONTROL_2 0x11111111 /* */
+#define CFG_MPP_CONTROL_3 0x00001111 /* */
+/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */
#define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/
ECC disable
non registered DRAM */
/* 31:26 25:22 21:20 19 18 17 16 */
- /* 100001 0000 010 0 0 0 0 */
+ /* 100001 0000 010 0 0 0 0 */
/* refresh_count=0x400
phisical interleaving disable
virtual interleaving enable */
/* 15 14 13:0 */
- /* 0 1 0x400 */
+ /* 0 1 0x400 */
# define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/
*-----------------------------------------------------------------------
*/
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
/* PCI MEMORY MAP section */
#define CFG_PCI0_MEM_BASE 0x80000000
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#define CONFIG_IDE_RESET /* no reset for ide supported */
-#define CONFIG_IDE_PREINIT /* check for units */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#define CONFIG_IDE_RESET /* no reset for ide supported */
+#define CONFIG_IDE_PREINIT /* check for units */
-#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
+#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
-#define CFG_ATA_BASE_ADDR 0
-#define CFG_ATA_IDE0_OFFSET 0
-#define CFG_ATA_IDE1_OFFSET 0
+#define CFG_ATA_BASE_ADDR 0
+#define CFG_ATA_IDE0_OFFSET 0
+#define CFG_ATA_IDE1_OFFSET 0
-#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
/*----------------------------------------------------------------------
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
#define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */
#if 0
-#define CFG_ENV_IS_IN_FLASH 0
-#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH 0
+#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x10000
#define CFG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
+/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
#endif
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_EEPROM_ADDR 0x050
+#define CFG_I2C_EEPROM_ADDR 0x050
#define CFG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */
#define CFG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/
#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
-#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
+#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
/*-----------------------------------------------------------------------
* Cache Configuration
#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
#define L2_INIT 0
#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#endif
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_BOARD_ASM_INIT 1
+#define CFG_BOARD_ASM_INIT 1
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff