powerpc/t1040qds: Add Video - HDMI support

[karo-tx-uboot.git] / include / configs / CPCI750.h

diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 3b0b888f7eb44f81a2b67f7f3c28823998d480c7..304a12bea9cef3d3bb27f980167fcb624b0649b6 100644 (file)
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -57,9 +41,11 @@
 
 #define CONFIG_CPCI750         1       /* this is an CPCI750 board     */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_BAUDRATE                9600    /* console baudrate = 9600      */
 
-#undef CONFIG_ECC                      /* enable ECC support */
+#define CONFIG_MV64360_ECC             /* enable ECC support */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
@@ -74,7 +60,6 @@
 /*#define CONFIG_SYS_HUSH_PARSER*/
 #define CONFIG_SYS_HUSH_PARSER
 
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
@@ -98,7 +83,6 @@
 #define CONFIG_MPSC_PORT       0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS            1
 #define CONFIG_ETHER_PORT      0
 
@@ -186,9 +170,10 @@
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_SPEED   80000           /* I2C speed default */
 
+#define CONFIG_PRAM 0
+
 #define CONFIG_SYS_GT_DUAL_CPU                 /* also for JTAG even with one cpu */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
@@ -233,19 +218,12 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x00300000      /* default load address */
 
-#define CONFIG_SYS_HZ                  1000            /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ              133000000       /* 133 MHz (CPU = 5*Bus = 666MHz)               */
-#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK             133000000       /* 133 MHz (CPU = 5*Bus = 666MHz)               */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_TCLK                133000000
 
-/*#define CONFIG_SYS_750FX_HID0                0x8000c084*/
-#define CONFIG_SYS_750FX_HID0          0x80008484
-#define CONFIG_SYS_750FX_HID1          0x54800000
-#define CONFIG_SYS_750FX_HID2          0x00000000
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -265,9 +243,8 @@
 /* #define CONFIG_SYS_INIT_RAM_ADDR    0x40000000*/ /* unused memory region */
 /* #define CONFIG_SYS_INIT_RAM_ADDR    0xfba00000*/ /* unused memory region */
 #define CONFIG_SYS_INIT_RAM_ADDR       0xf1080000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_END        0x1000
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
@@ -458,7 +435,11 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O                  */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x0000  /* Offset for normal register accesses  */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0000  /* Offset for alternate registers       */
-
+#ifndef __ASSEMBLY__
+int ata_device(int dev);
+#endif
+#define ATA_DEVICE(dev)                 ata_device(dev)
+#define CONFIG_ATAPI                    1
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -498,8 +479,8 @@
  * IBAT4 and DBAT4
  * FIXME: ingo disable BATs for Linux Kernel
  */
-#undef SETUP_HIGH_BATS_FX750           /* don't initialize BATS 4-7 */
-/*#define SETUP_HIGH_BATS_FX750*/              /* initialize BATS 4-7 */
+/* #undef SETUP_HIGH_BATS_FX750        */      /* don't initialize BATS 4-7 */
+#define SETUP_HIGH_BATS_FX750          /* initialize BATS 4-7 */
 
 #ifdef SETUP_HIGH_BATS_FX750
 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
@@ -617,14 +598,12 @@
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
+#define CPCI750_SLAVE_TEST     (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
+#define CPCI750_ECC_TEST       (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
+#define CONFIG_SYS_PLD_VER     0xf0e00000
+
+#define CONFIG_OF_LIBFDT 1
+
 #endif /* __CONFIG_H */