Merge branch 'u-boot/master' into u-boot-arm/master

[karo-tx-uboot.git] / include / configs / CPU86.h

diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index cf21fd90ee3714670d09db837d8f8d647d7f8a53..a85a418fb1d1e0d392bdd3e2a66e9d9bb8ef1b62 100644 (file)
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -37,6 +21,12 @@
 #define CONFIG_CPU86           1       /* ...on a CPU86 board  */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
+#ifdef CONFIG_BOOT_ROM
+#define CONFIG_SYS_TEXT_BASE   0xFF800000
+#else
+#define        CONFIG_SYS_TEXT_BASE    0xFF000000
+#endif
+
 /*
  * select serial console configuration
  *
@@ -83,8 +73,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CMXFCR_MASK1       (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE1      (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -96,8 +86,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -123,10 +113,11 @@
 /*-----------------------------------------------------------------------
  * I2C/EEPROM/RTC configuration
  */
-#define        CONFIG_SOFT_I2C                 /* Software I2C support enabled */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT                    /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 
-# define CONFIG_SYS_I2C_SPEED          50000
-# define CONFIG_SYS_I2C_SLAVE          0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -145,15 +136,6 @@
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
-/*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*-----------------------------------------------------------------------
  * Miscellaneous configuration options
  */
@@ -179,7 +161,6 @@
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_NFS
@@ -207,8 +188,6 @@
 
 #define        CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define        CONFIG_SYS_RESET_ADDRESS 0xFFF00100     /* "bad" address                */
 
 /*
@@ -300,9 +279,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* size in bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x4000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -314,7 +292,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_SDRAM_MAX_SIZE      0x08000000      /* max. 128 MB          */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
@@ -343,15 +321,6 @@
 #define CONFIG_ENV_SIZE                (2048 - 512)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */