]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/CPU87.h
powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260
[karo-tx-uboot.git] / include / configs / CPU87.h
index 2b1716afeefd64f7b54f492c62b8f94703cdb339..d3a59e8ba7e32701018fa69fda214ec64c5ca2c2 100644 (file)
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,7 +17,6 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC8260         1       /* This is an MPC8260 CPU               */
 #define CONFIG_CPU87           1       /* ...on a CPU87 board  */
 #define CONFIG_PCI
 #define CONFIG_CPM2            1       /* Has a CPM2 */
@@ -93,8 +76,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CMXFCR_MASK1       (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE1      (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 /*-----------------------------------------------------------------------
  * I2C/EEPROM/RTC configuration
  */
-#define CONFIG_SOFT_I2C                        /* Software I2C support enabled */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 
-# define CONFIG_SYS_I2C_SPEED          50000
-# define CONFIG_SYS_I2C_SLAVE          0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
 #define CONFIG_CMD_I2C
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
     #define CONFIG_CMD_PCI
 #endif
 
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100    /* "bad" address                */
 
 #define CONFIG_LOOPW