CONFIGS: peach-pit: Enable display for peach_pit board

[karo-tx-uboot.git] / include / configs / CU824.h

diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 4a3f2bc8a41fed8450c5e7ab4be1cf4fab875323..dc98a560c86e24e23d33ab656bbd3b3faeb15784 100644 (file)
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -41,14 +25,13 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC824X         1
 #define CONFIG_MPC8240         1
 #define CONFIG_CU824           1
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                9600
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -84,15 +67,11 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size      */
 
 #if 1
 #define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
 #endif
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 /* Print Buffer Size
  */
@@ -114,7 +93,7 @@
 
 #define CONFIG_SYS_EUMB_ADDR       0xFCE00000
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_MONITOR_LEN     (256 << 10) /* Reserve 256 kB for Monitor   */
 #define CONFIG_SYS_MALLOC_LEN      (128 << 10) /* Reserve 128 kB for malloc()  */
@@ -138,13 +117,9 @@
  * Definitions for initial stack pointer and data area
  */
 
-       /* Size in bytes reserved for initial data
-        */
-#define CONFIG_SYS_GBL_DATA_SIZE    128
-
 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
@@ -167,7 +142,6 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CONFIG_SYS_HZ               1000
 
        /* Bit-field values for MCCR1.
         */
@@ -290,22 +264,14 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI                     /* include pci support                  */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_TULIP
 #define CONFIG_TULIP_USE_IO