Merge git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / include / configs / ESTEEM192E.h

diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h
index 11a862e987661e8223df05232922fbe91afb1d6f..7d2fb47d80b245ef7441f2be795c58761337e364 100644 (file)
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -36,6 +20,8 @@
 #define CONFIG_MPC850          1       /* This is a MPC850 CPU         */
 #define CONFIG_ESTEEM192E      1       /* ...on a EST ESTEEM192E       */
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 #define CONFIG_FLASH_16BIT     1       /* Rom 16 bit data bus          */
 
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
@@ -100,10 +86,6 @@
 
 #define        CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -118,9 +100,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 
@@ -310,22 +291,4 @@
 #define CONFIG_SYS_MAMR_8COL   0x18803112
 #define CONFIG_SYS_MAMR_9COL   0x18803112      /* same as 8 column because its just easier to port with*/
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */