Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

[karo-tx-uboot.git] / include / configs / KUP4K.h

diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 9702d63eb8114ea4dd09e9b1137069c2a0d81af0..7cf09d01f603d1cf8bdc277f2988a485a0aab200 100644 (file)
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -3,23 +3,7 @@
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -106,13 +90,11 @@
 /*
  * enable I2C and select the hardware/software driver
  */
-#undef CONFIG_HARD_I2C         /* I2C with hardware support    */
-#define        CONFIG_SOFT_I2C         /* I2C bit-banged               */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      93000   /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 
-#define CONFIG_SYS_I2C_SPEED   93000   /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE   0xFE
-
-#ifdef CONFIG_SOFT_I2C
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -128,7 +110,6 @@
 #define I2C_SCL(bit)   if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
                        else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY      udelay(2)       /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 
 /*-----------------------------------------------------------------------
  * I2C Configuration
@@ -139,9 +120,9 @@
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST  {CONFIG_SYS_I2C_PICIO_ADDR,     \
-                       CONFIG_SYS_I2C_RTC_ADDR,        \
-                       }
+#define CONFIG_SYS_POST_I2C_ADDRS      {CONFIG_SYS_I2C_PICIO_ADDR,     \
+                                        CONFIG_SYS_I2C_RTC_ADDR,       \
+                                       }
 
 #define CONFIG_RTC_PCF8563             /* use Philips PCF8563 RTC      */
 
@@ -173,7 +154,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
@@ -191,8 +171,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x400000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000            /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 115200 }
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET 1
@@ -211,9 +189,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -354,6 +331,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD  1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */