Merge branch 'karo-tx-uboot' into kc-merge

[karo-tx-uboot.git] / include / configs / M5275EVB.h

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 981670ac069bde2084da8670c2eb7b494a408a52..4dddab7c1dfee179d10c411a315c492fc6e20771 100644 (file)
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -7,23 +7,7 @@
  * Based off of M5272C3 board code by Josef Baumgartner
  * <josef.baumgartner@telex.de>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -46,7 +30,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
@@ -87,7 +70,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_MII_INIT                1
 #define CONFIG_SYS_DISCOVER_PHY
@@ -111,12 +93,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C                /* I2C with hw support */
-#undef CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       80000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x00000300
 #define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR      (0xFFF0)
@@ -158,7 +139,6 @@
        "save\0"                                \
        ""
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 150000000
 
 /*
@@ -173,9 +153,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
-#define CONFIG_SYS_INIT_RAM_END        0x10000 /* End of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       1000    /* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -222,9 +201,9 @@
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 8)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
 #define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 4)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
 #define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINV | CF_CACR_INVI)
 #define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
                                         CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \