]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/M5282EVB.h
CONFIGS: peach-pit: Enable display for peach_pit board
[karo-tx-uboot.git] / include / configs / M5282EVB.h
index 6e0aa14d3a0945bc24757fc7f589f81bc0c75099..fd970d0787f834c08cf23f2b901e49f013db54e9 100644 (file)
@@ -3,23 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -41,7 +25,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
 
@@ -74,7 +57,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_SYS_MEMTEST_START       0x400
 #define CONFIG_SYS_MEMTEST_END         0x380000
 
-#define CONFIG_SYS_HZ                  1000
 #define        CONFIG_SYS_CLK                  64000000
 
 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
-#define CONFIG_SYS_INIT_RAM_END        0x10000 /* End of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64      /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
-#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
 #else
-#define CONFIG_SYS_MONITOR_BASE        (TEXT_BASE + 0x418)     /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_TEXT_BASE + 0x418)  /* 24 Byte for CFM-Config */
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN         0x20000
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 8)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
 #define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 4)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
 #define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINV + CF_CACR_DCM)
 #define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
                                         CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \