e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels

[karo-tx-uboot.git] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 1478ec8c3ca2f8433c0fef115823d8587107205e..3fdd1b0d2fa9acbf978ee7ebfa39c22928888dfe 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8313ERDB     1
 
 #define CONFIG_PCI
+#define CONFIG_FSL_ELBC 1
 
 #define CONFIG_MISC_INIT_R
 
@@ -231,6 +232,13 @@
 #define CONFIG_SYS_NAND_BASE           0xE2800000
 #endif
 
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITION
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT                 "nand0=e2800000.flash"
+#define MTDPARTS_DEFAULT               \
+       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
@@ -435,7 +443,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1
-
+#define CONFIG_AUTO_COMPLETE   /* add autocompletion support   */
 
 /*
  * Miscellaneous configurable options
@@ -452,10 +460,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000     /* PCIHOST  */
 
@@ -513,11 +521,12 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH       (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
-#define CONFIG_SYS_SICRL       SICRL_USBDR                     /* Enable Internal USB Phy  */
+#define CONFIG_SYS_SICRL       SICRL_USBDR_10                  /* Enable Internal USB Phy  */
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
 #define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
-                        HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+                                HID0_ENABLE_INSTRUCTION_CACHE | \
+                                HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 
 #define CONFIG_SYS_HID2 HID2_HBE