e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels

[karo-tx-uboot.git] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 4bf05d2033616fbd3401250b057f6582befbb2f9..3fdd1b0d2fa9acbf978ee7ebfa39c22928888dfe 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8313ERDB     1
 
 #define CONFIG_PCI
+#define CONFIG_FSL_ELBC 1
 
 #define CONFIG_MISC_INIT_R
 
@@ -216,7 +217,8 @@
 /*
  * Local Bus LCRR and LBCR regs
  */
-#define CONFIG_SYS_LCRR        LCRR_EADC_1 | LCRR_CLKDIV_4
+#define CONFIG_SYS_LCRR_EADC   LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR    ( 0x00040000 /* TODO */ \
                        | (0xFF << LBCR_BMT_SHIFT) \
                        | 0xF ) /* 0x0004ff0f */
@@ -230,18 +232,25 @@
 #define CONFIG_SYS_NAND_BASE           0xE2800000
 #endif
 
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITION
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT                 "nand0=e2800000.flash"
+#define MTDPARTS_DEFAULT               \
+       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
 
 #define CONFIG_SYS_NAND_BR_PRELIM      ( CONFIG_SYS_NAND_BASE \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
@@ -434,7 +443,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1
-
+#define CONFIG_AUTO_COMPLETE   /* add autocompletion support   */
 
 /*
  * Miscellaneous configurable options
@@ -451,10 +460,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000     /* PCIHOST  */
 
@@ -512,11 +521,12 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH       (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
-#define CONFIG_SYS_SICRL       SICRL_USBDR                     /* Enable Internal USB Phy  */
+#define CONFIG_SYS_SICRL       SICRL_USBDR_10                  /* Enable Internal USB Phy  */
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
 #define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
-                        HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+                                HID0_ENABLE_INSTRUCTION_CACHE | \
+                                HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 
 #define CONFIG_SYS_HID2 HID2_HBE
 
@@ -579,13 +589,6 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_ETHADDR         00:E0:0C:00:95:01
-#define CONFIG_ETH1ADDR                00:E0:0C:00:95:02
-
-#define CONFIG_IPADDR          10.0.0.2
-#define CONFIG_SERVERIP                10.0.0.1
-#define CONFIG_GATEWAYIP       10.0.0.1
-#define CONFIG_NETMASK         255.0.0.0
 #define CONFIG_NETDEV          eth1
 
 #define CONFIG_HOSTNAME                mpc8313erdb