Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 31503af5d239eb9d37142e6f1e868d69f3ba9fe6..c28dfe0068ebec732937e618886746362292d93a 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -35,6 +35,25 @@
 #define CONFIG_MPC8313         1
 #define CONFIG_MPC8313ERDB     1
 
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
+#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SYS_TEXT_BASE   0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#define CONFIG_SPL_MAX_SIZE    (4 * 1024)
+#define CONFIG_SPL_PAD_TO      0x4000
+
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
@@ -42,13 +61,11 @@
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE   0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
+#endif
+
+#endif /* CONFIG_NAND */
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xFE000000
@@ -82,11 +99,12 @@
 
 #define CONFIG_SYS_CLK_FREQ    CONFIG_83XX_CLKIN
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R              /* call board_early_init_r */
 
 #define CONFIG_SYS_IMMR                0xE0000000
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
 #define CONFIG_DEFAULT_IMMR    CONFIG_SYS_IMMR
 #endif
 
@@ -226,7 +244,7 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
-       !defined(CONFIG_NAND_SPL)
+       !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
@@ -255,7 +273,7 @@
 #define CONFIG_SYS_LBC_MRTPR   0x20000000  /*TODO */
 
 /* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
+#if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_NAND_BASE           0xFFF00000
 #else
 #define CONFIG_SYS_NAND_BASE           0xE2800000
@@ -266,7 +284,7 @@
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT                 "nand0=e2800000.flash"
 #define MTDPARTS_DEFAULT               \
-       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+       "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
@@ -291,7 +309,7 @@
                                | OR_FCM_EHTR)
                                /* 0xFFFF8396 */
 
-#ifdef CONFIG_NAND_U_BOOT
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
@@ -363,6 +381,9 @@
 #define CONFIG_OF_BOARD_SETUP  1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
+#define CONFIG_MPC83XX_GPIO 1
+#define CONFIG_CMD_GPIO 1
+
 /*
  * Serial Port
  */
@@ -379,7 +400,6 @@
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /* I2C */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support*/
@@ -446,7 +466,7 @@
 /*
  * Environment
  */
-#if defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_NAND)
        #define CONFIG_ENV_IS_IN_NAND   1
        #define CONFIG_ENV_OFFSET               (512 * 1024)
        #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
@@ -493,7 +513,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
     #undef CONFIG_CMD_SAVEENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -567,7 +587,7 @@
        HRCWH_TSEC2M_IN_RGMII |\
        HRCWH_BIG_ENDIAN)
 
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
                       HRCWH_FROM_0XFFF00100 |\
                       HRCWH_ROM_LOC_NAND_SP_8BIT |\
@@ -581,7 +601,8 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH       (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
-#define CONFIG_SYS_SICRL       SICRL_USBDR_10  /* Enable Internal USB Phy  */
+                       /* Enable Internal USB Phy and GPIO on LCD Connector */
+#define CONFIG_SYS_SICRL       (SICRL_USBDR_10 | SICRL_LBC)
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
 #define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
@@ -673,19 +694,21 @@
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 
-#define XMK_STR(x)     #x
-#define MK_STR(x)      XMK_STR(x)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                                    \
        "ethprime=TSEC1\0"                                              \
        "uboot=" CONFIG_UBOOTPATH "\0"                                  \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
-               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
-               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
+               "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+                       " +$filesize; " \
+               "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+                       " +$filesize; " \
+               "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+                       " $filesize; "  \
+               "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+                       " +$filesize; " \
+               "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+                       " $filesize\0"  \
        "fdtaddr=780000\0"                                              \
        "fdtfile=" CONFIG_FDTFILE "\0"                                  \
        "console=ttyS0\0"                                               \
@@ -712,7 +735,4 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#undef MK_STR
-#undef XMK_STR
-
 #endif /* __CONFIG_H */