rename CFG_ENV macros to CONFIG_ENV

[karo-tx-uboot.git] / include / configs / MPC8315ERDB.h

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index ff7101f249a2038b81bc050b3ad0dd2e669eedd4..5879a823b8515eab51327fb7afcbe38526e25826 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -188,7 +188,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI          /* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER   /* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CFG_FLASH_CFI_WIDTH    FLASH_CFI_16BIT
 
 #define CFG_FLASH_BASE         0xFE000000 /* FLASH base address */
@@ -203,7 +203,7 @@
 #define CFG_OR0_PRELIM         ( (~(CFG_FLASH_SIZE - 1) << 20) \
                                | OR_UPM_XAM \
                                | OR_GPCM_CSNT \
-                               | OR_GPCM_ACS_0b11 \
+                               | OR_GPCM_ACS_DIV2 \
                                | OR_GPCM_XACS \
                                | OR_GPCM_SCY_15 \
                                | OR_GPCM_TRLX \
@@ -299,7 +299,7 @@
 #define CFG_PCI_MMIO_BASE      0x90000000
 #define CFG_PCI_MMIO_PHYS      CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE      0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE                0xE0300000
+#define CFG_PCI_IO_BASE                0x00000000
 #define CFG_PCI_IO_PHYS                0xE0300000
 #define CFG_PCI_IO_SIZE                0x100000 /* 1M */
 
@@ -321,6 +321,8 @@
 #define CONFIG_NET_MULTI       1
 #endif
 
+#define CONFIG_HAS_FSL_DR_USB
+
 /*
  * TSEC
  */
@@ -348,19 +350,42 @@
 /* Options are: eTSEC[0-1] */
 #define CONFIG_ETHPRIME                "eTSEC1"
 
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE    2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET       0x18000
+#define CFG_SATA1              (CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS                FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET       0x19000
+#define CFG_SATA2              (CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS                FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
 /*
  * Environment
  */
 #ifndef CFG_RAMBOOT
-       #define CFG_ENV_IS_IN_FLASH     1
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-       #define CFG_ENV_SECT_SIZE       0x10000 /* 64K(one sector) for env */
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_IN_FLASH  1
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+       #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
+       #define CONFIG_ENV_SIZE         0x2000
 #else
        #define CFG_NO_FLASH            1       /* Flash is not usable now */
-       #define CFG_ENV_IS_NOWHERE      1       /* Store ENV in memory only */
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - 0x1000)
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
+       #define CONFIG_ENV_SIZE         0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
@@ -430,6 +455,7 @@
 /*
  * MMU Setup
  */
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /* DDR: cache cacheable */
 #define CFG_IBAT0L     (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -508,7 +534,7 @@
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */