Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[karo-tx-uboot.git] / include / configs / MPC8349ITX.h

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 2c3f1f62a64f00bfbbf501e4cbb22defb90602a0..ffb9a158aec96f8a8580fde30f74bb4b6732cc07 100644 (file)
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -1,23 +1,7 @@
 /*
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -90,7 +74,7 @@
 
 #define CONFIG_PCI
 #define CONFIG_RTC_DS1337
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_TSEC_ENET               /* TSEC Ethernet support */
 
 /*
@@ -98,12 +82,15 @@
  */
 
 /* I2C */
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
 #define CONFIG_SYS_SPD_BUS_NUM         1       /* The I2C bus for SPD */
 #define CONFIG_SYS_RTC_BUS_NUM         1       /* The I2C bus for RTC */
 
@@ -115,9 +102,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* I2C1, DS1339 RTC*/
 #define SPD_EEPROM_ADDRESS             0x51    /* I2C1, DDR */
 
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-
 /* Don't probe these addresses: */
 #define CONFIG_SYS_I2C_NOPROBES        { {1, CONFIG_SYS_I2C_8574_ADDR1}, \
                                 {1, CONFIG_SYS_I2C_8574_ADDR2}, \
@@ -131,8 +115,6 @@
 #define I2C_8574_PCI66         0x20    /* 0=33MHz PCI, 1=66MHz PCI */
 #define I2C_8574_FLASHSIDE     0x40    /* 0=Reset vector from U4, 1=from U7*/
 
-#undef CONFIG_SOFT_I2C
-
 #endif
 
 /* Compact Flash */
@@ -199,7 +181,7 @@
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_MAX_MEM_MAPPED   ((phys_size_t)256 << 20)
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
 #define CONFIG_SPD_EEPROM              /* use SPD EEPROM for DDR setup*/
 #endif
 
@@ -393,6 +375,7 @@ boards, we say we have two, but don't display a message if we find only one. */
  * PCI
  */
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_MPC83XX_PCI2
 
@@ -544,7 +527,7 @@ boards, we say we have two, but don't display a message if we find only one. */
        #define CONFIG_CMD_PCI
 #endif
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
        #define CONFIG_CMD_I2C
 #endif
 
@@ -579,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -748,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif