sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / MPC8360EMDS.h

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a1fbd5e4a4b4bc8367470b96ddd5e48866c32ac9..aefde74fc52d68825e9ca2a9c825fc96c6402ae3 100644 (file)
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -3,20 +3,7 @@
  *
  * Dave Liu <daveliu@freescale.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -27,7 +14,6 @@
  */
 #define CONFIG_E300            1 /* E300 family */
 #define CONFIG_QE              1 /* Has QE */
-#define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC8360         1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360EMDS     1 /* MPC8360EMDS board specific */
 
@@ -423,14 +409,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x52} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x52} }
 
 /*
  * Config on-board RTC
@@ -458,6 +442,7 @@
 
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
@@ -558,7 +543,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
        #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
@@ -571,7 +555,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -699,7 +682,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*