Exynos5420: Introduce support for the Peach-Pit board

[karo-tx-uboot.git] / include / configs / MPC8360ERDK.h

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 5aad4fd614e842377e00f048cd0cbf899d0b3a92..1b8bad179b5221ce18daec4f127eb5db18e09e10 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -8,10 +8,7 @@
  * Copyright (C) 2007 MontaVista Software, Inc.
  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -22,7 +19,6 @@
  */
 #define CONFIG_E300            1 /* E300 family */
 #define CONFIG_QE              1 /* Has QE */
-#define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC8360         1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360ERDK     1 /* MPC8360ERDK board specific */
 
@@ -170,7 +166,7 @@
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN  (128 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MALLOC_LEN  (256 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
@@ -287,15 +283,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_NOPROBES        { {0, 0x52} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x52} }
 
 /*
  * General PCI
@@ -314,6 +310,7 @@
 #define CONFIG_SYS_PCI1_IO_SIZE                0x100000 /* 1M */
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
@@ -407,7 +404,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
        #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
@@ -420,7 +416,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -548,7 +543,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*