Exynos5420: Introduce support for the Peach-Pit board

[karo-tx-uboot.git] / include / configs / MPC8536DS.h

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index cc2b7c332b780849667188c9b9e6b3f3529b7e14..72f5fde16a7b7331338ce487916cd5caae07ce0c 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -1,23 +1,7 @@
 /*
  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -27,6 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 #include "../board/freescale/common/ics307_clk.h"
 
 #ifdef CONFIG_36BIT
@@ -40,25 +26,25 @@
 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
 #else
-#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
+#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
 #define CONFIG_SYS_TEXT_BASE   0xf8f82000
 #endif /* CONFIG_NAND_SPL */
 #endif
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD          1
-#define CONFIG_SYS_TEXT_BASE   0xf8f80000
+#define CONFIG_SYS_TEXT_BASE   0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH                1
-#define CONFIG_SYS_TEXT_BASE   0xf8f80000
+#define CONFIG_SYS_TEXT_BASE   0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff80000
+#define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
 
 #ifndef        CONFIG_RESET_VECTOR_ADDRESS
@@ -72,7 +58,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_MPC8536         1
 #define CONFIG_MPC8536DS       1
 
@@ -138,7 +123,7 @@
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
@@ -343,7 +328,7 @@
 
 /* NAND boot: 4K NAND loader config */
 #define CONFIG_SYS_NAND_SPL_SIZE       0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_DST     (CONFIG_SYS_INIT_L2_ADDR)
 #define CONFIG_SYS_NAND_U_BOOT_START \
                (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
@@ -434,15 +419,15 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0, 0x29}}     /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x29} }
 
 /*
  * I2C2 EEPROM
@@ -643,7 +628,7 @@
 #if defined(CONFIG_RAMBOOT_NAND)
 #define CONFIG_ENV_IS_IN_NAND  1
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -666,11 +651,7 @@
 #endif
 #else
        #define CONFIG_ENV_IS_IN_FLASH  1
-       #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-       #define CONFIG_ENV_ADDR         0xfff80000
-       #else
        #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-       #endif
        #define CONFIG_ENV_SIZE         0x2000
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 #endif
@@ -736,7 +717,6 @@
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -746,7 +726,6 @@
                + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -758,7 +737,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*