Big white-space cleanup.

[karo-tx-uboot.git] / include / configs / MPC8540ADS.h

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index b7749926717f38ba2c29da3a6173d00870bbdcb2..57197598086f3de2c79ac419a6b539571d7723ec 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -46,7 +46,7 @@
 #endif
 
 #define CONFIG_PCI
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
+#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL                 /* possible DLL fix needed */
@@ -55,6 +55,7 @@
 #define CONFIG_DDR_ECC                 /* only for ECC DDR module */
 #define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 
+#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 /*
  * sysclk for MPC85xx
@@ -97,8 +98,9 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT    0xff700000      /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT    0xff700000      /* CCSRBAR Default */
 #define CFG_CCSRBAR            0xe0000000      /* relocated CCSRBAR */
+#define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR */
 
 
@@ -145,7 +147,7 @@
 #define CFG_FLASH_ERASE_TOUT   60000   /* Flash Erase Timeout (ms) */
 #define CFG_FLASH_WRITE_TOUT   500     /* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE       TEXT_BASE       /* start of monitor */
+#define CFG_MONITOR_BASE       TEXT_BASE       /* start of monitor */
 
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
@@ -266,16 +268,16 @@
 #define CFG_BCSR               (CFG_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK      1
+#define CFG_INIT_RAM_LOCK      1
 #define CFG_INIT_RAM_ADDR      0xe4010000      /* Initial RAM address */
-#define CFG_INIT_RAM_END       0x4000          /* End of used area in RAM */
+#define CFG_INIT_RAM_END       0x4000          /* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE      128             /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE      128             /* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
+#define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
@@ -298,16 +300,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE    1
-#define CONFIG_OF_BOARD_SETUP  1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE  8192
-
-#define OF_CPU                 "PowerPC,8540@0"
-#define OF_SOC                 "soc8540@e0000000"
-#define OF_TBCLK               (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH         "/soc8540@e0000000/serial@4500"
+#define CONFIG_OF_LIBFDT               1
+#define CONFIG_OF_BOARD_SETUP          1
+#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 #define CFG_64BIT_VSPRINTF     1
 #define CFG_64BIT_STRTOUL      1
@@ -342,7 +337,7 @@
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
@@ -350,7 +345,7 @@
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR   0xe0000000
     #define PCI_ENET0_MEMADDR  0xe0000000
-    #define PCI_IDSEL_NUMBER   0x0c    /* slot0->3(IDSEL)=12->15 */
+    #define PCI_IDSEL_NUMBER   0x0c    /* slot0->3(IDSEL)=12->15 */
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
@@ -362,7 +357,7 @@
 #if defined(CONFIG_TSEC_ENET)
 
 #ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
+#define CONFIG_NET_MULTI       1
 #endif
 
 #define CONFIG_MII             1       /* MII PHY management */
@@ -427,6 +422,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -444,6 +440,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP                   /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
@@ -465,13 +462,6 @@
  */
 #define CFG_BOOTMAPSZ  (8 << 20)       /* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE                32768
-#define CFG_CACHELINE_SIZE     32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
@@ -492,6 +482,7 @@
 
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD