Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 95ce0034c389b9338a50852803161876b47efc77..6acd54db8502686b207f80e385c00e16cfaeecba 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,23 +1,7 @@
 /*
  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -52,6 +36,7 @@
 #define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
@@ -90,7 +75,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -357,13 +342,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}  /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET          0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -532,7 +516,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -541,7 +524,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -593,13 +575,18 @@ extern unsigned long get_clock_freq(void);
 #define        CONFIG_EXTRA_ENV_SETTINGS               \
        "hwconfig=fsl_ddr:ecc=off\0"            \
        "netdev=eth0\0"                         \
-       "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"  \
+       "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
        "tftpflash=tftpboot $loadaddr $uboot; " \
-               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
-               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "         \
-               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
-               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "    \
-               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
+               "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+                       " +$filesize; " \
+               "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+                       " +$filesize; " \
+               "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+                       " $filesize; "  \
+               "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+                       " +$filesize; " \
+               "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+                       " $filesize\0"  \
        "consoledev=ttyS1\0"                    \
        "ramdiskaddr=2000000\0"                 \
        "ramdiskfile=ramdisk.uboot\0"           \