powerpc/t2080rdb: Add T2080PCIe-RDB board support

[karo-tx-uboot.git] / include / configs / MPC8569MDS.h

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 7a5d86d2b7b840b79c6e81768971bd409bf8ea9d..58b9c26e93dba0a9c0253d604f32147a62cbac73 100644 (file)
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -1,23 +1,7 @@
 /*
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -29,7 +13,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48/68 */
 #define CONFIG_MPC8569         1       /* MPC8569 specific */
 #define CONFIG_MPC8569MDS      1       /* MPC8569MDS board specific */
 
@@ -41,6 +24,7 @@
 #define CONFIG_PCI             1       /* Disable PCI/PCIE */
 #define CONFIG_PCIE1           1       /* PCIE controller */
 #define CONFIG_FSL_PCI_INIT    1       /* use common fsl pci init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_QE                      /* Enable QE */
@@ -72,7 +56,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
 #else
-#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
+#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
 #define CONFIG_SYS_TEXT_BASE   0xf8f82000
 #endif
 #endif
@@ -113,7 +97,7 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_FSL_DDR3
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -274,7 +258,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SERIAL_MULTI            1
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -292,7 +275,6 @@ extern unsigned long get_clock_freq(void);
 /* Use the HUSH parser*/
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -303,15 +285,15 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /*
  * I2C2 EEPROM
@@ -562,7 +544,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      2048            /* Console I/O Buffer Size */
 #else
@@ -573,7 +554,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAXARGS     32              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
                                                /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ  1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -585,7 +565,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*