at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / MPC8572DS.h

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index d7910e1c731f4e5bd30de4947fbe04bb3b63cd84..d233365b7d0e5dc9cff1162b11474e84c52b759b 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -205,8 +205,7 @@
 
 
 #define CONFIG_FLASH_BR_PRELIM \
-       (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
-       | BR_PS_16 | BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 
 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
@@ -376,20 +375,20 @@
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
-#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
-#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
@@ -418,9 +417,6 @@
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -739,21 +735,26 @@
 #define CONFIG_BAUDRATE        115200
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
- "hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0"                  \
- "netdev=eth0\0"                                               \
- "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                                \
- "tftpflash=tftpboot $loadaddr $uboot; "                       \
-       "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
-       "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
-       "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
-       "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
-       "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
- "consoledev=ttyS0\0"                          \
- "ramdiskaddr=2000000\0"                       \
- "ramdiskfile=8572ds/ramdisk.uboot\0"          \
- "fdtaddr=c00000\0"                            \
- "fdtfile=8572ds/mpc8572ds.dtb\0"              \
- "bdev=sda3\0"
+"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"                \
+"netdev=eth0\0"                                                \
+"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                            \
+"tftpflash=tftpboot $loadaddr $uboot; "                        \
+       "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+               " +$filesize; " \
+       "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+               " +$filesize; " \
+       "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+               " $filesize; "  \
+       "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+               " +$filesize; " \
+       "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+               " $filesize\0"  \
+"consoledev=ttyS0\0"                           \
+"ramdiskaddr=2000000\0"                        \
+"ramdiskfile=8572ds/ramdisk.uboot\0"           \
+"fdtaddr=c00000\0"                             \
+"fdtfile=8572ds/mpc8572ds.dtb\0"               \
+"bdev=sda3\0"
 
 #define CONFIG_HDBOOT                          \
  "setenv bootargs root=/dev/$bdev rw "         \