powerpc/t2080rdb: Add T2080PCIe-RDB board support

[karo-tx-uboot.git] / include / configs / P1_P2_RDB.h

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 447cd98dafc4fc20d05cc72a01f1c2046236fc8d..2ffaf5c0d93c74529d0295f800398a7541b8daaf 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -38,7 +38,7 @@
 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
 #else
-#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
+#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
 #define CONFIG_SYS_TEXT_BASE           0xf8f82000
 #endif /* CONFIG_NAND_SPL */
 #endif
@@ -46,17 +46,17 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD          1
 #define CONFIG_SYS_TEXT_BASE           0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH                1
 #define CONFIG_SYS_TEXT_BASE           0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0xeff80000
+#define CONFIG_SYS_TEXT_BASE           0xeff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -70,7 +70,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48/P1020/P2020,etc*/
 #define CONFIG_FSL_ELBC                1       /* Enable eLBC Support */
 
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
@@ -141,7 +140,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #undef CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 
@@ -267,7 +266,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* NAND boot: 4K NAND loader config */
 #define CONFIG_SYS_NAND_SPL_SIZE       0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_DST     (CONFIG_SYS_INIT_L2_ADDR)
 #define CONFIG_SYS_NAND_U_BOOT_START   (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (0)
@@ -351,16 +350,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x29}}      /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x29} }
 
 /*
  * I2C2 EEPROM
@@ -496,7 +494,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #if defined(CONFIG_RAMBOOT_NAND)
        #define CONFIG_ENV_IS_IN_NAND   1
        #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
-       #define CONFIG_ENV_OFFSET       ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+       #define CONFIG_ENV_OFFSET       ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
@@ -514,11 +512,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 #else
        #define CONFIG_ENV_IS_IN_FLASH  1
-       #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-       #define CONFIG_ENV_ADDR         0xfff80000
-       #else
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-       #endif
        #define CONFIG_ENV_SIZE         0x2000
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 #endif
@@ -587,7 +581,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -597,7 +590,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
                                                /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -609,7 +601,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*