mx6sxsabresd: Add Ethernet support

[karo-tx-uboot.git] / include / configs / PK1C20.h

diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 165dde043e6429d03af07a8a9384f89e9dd2b54f..e7d08647fc9d1c5fe987725f9a0533bc54ee885a 100644 (file)
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
  * Scott McNutt <smcnutt@psyent.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -62,12 +46,11 @@
  *     -The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)    /* Reserve 128k         */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* Global data size rsvd*/
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_BASE         (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP             CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
@@ -124,14 +107,16 @@
  * TIMEBASE --
  *
  * The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
  *----------------------------------------------------------------------*/
+#define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE        0x02120820      /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ         3               /* Timer IRQ num        */
-#define CONFIG_SYS_NIOS_TMRMS          10              /* 10 msec per tick     */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ          (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ         3       /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS          10      /* Desired period */
+#define CONFIG_SYS_NIOS_TMRCNT \
+               (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
 
 /*------------------------------------------------------------------------
  * STATUS LED -- Provides a simple blinking led. For Nios2 each board
@@ -140,6 +125,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LEDPIO_ADDR         0x02120870      /* LED PIO base addr    */
 #define CONFIG_STATUS_LED                      /* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
 
 #define STATUS_LED_BIT         1               /* Bit-0 on PIO         */
 #define STATUS_LED_STATE       1               /* Blinking             */
@@ -152,7 +138,6 @@
  * cache bypass so there's no need to monkey with inx/outx macros.
  *----------------------------------------------------------------------*/
 #define CONFIG_SMC91111_BASE   0x82110300      /* Base addr (bypass)   */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111                        /* Using SMC91c111      */
 #undef CONFIG_SMC91111_EXT_PHY                 /* Internal PHY         */
 #define CONFIG_SMC_USE_32_BIT                  /* 32-bit interface     */
@@ -227,7 +212,6 @@
  * MISC
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP                            /* Provide extended help*/
-#define CONFIG_SYS_PROMPT              "==> "          /* Command prompt       */
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O buf size */
 #define CONFIG_SYS_MAXARGS             16              /* Max command args     */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot arg buf size    */
@@ -237,6 +221,5 @@
 #define CONFIG_SYS_MEMTEST_END         CONFIG_SYS_INIT_SP - 0x00020000
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #endif /* __CONFIG_H */