Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / PPChameleonEVB.h

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 3bc3d70bdcb1a3bafe78d7f3d60ed94a365954bc..e277d0d933832c87f2f028e02b364c2a87a59b3a 100644 (file)
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -11,20 +11,7 @@
  *
  * Credits: Stefan Roese, Wolfgang Denk
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -72,10 +59,10 @@
  */
 
 #define CONFIG_405EP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_PPCHAMELEONEVB  1       /* ...on a PPChameleonEVB board */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFB0000      /* Reserve 320 kB for Monitor */
+#define CONFIG_SYS_LDSCRIPT    "board/dave/PPChameleonEVB/u-boot.lds"
 
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
@@ -104,7 +91,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
 #undef CONFIG_EXT_PHY
-#define CONFIG_NET_MULTI       1
 
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
@@ -170,12 +156,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 
 #undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
@@ -210,8 +192,6 @@
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
 
 /*-----------------------------------------------------------------------
@@ -327,6 +307,7 @@
 #define PCI_HOST_AUTO  2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 #undef CONFIG_PCI_PNP                  /* do pci plug-and-play         */
                                        /* resource configuration       */
@@ -421,10 +402,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
@@ -531,10 +513,9 @@
 #define CONFIG_SYS_OCM_DATA_ADDR       0xF8000000
 #define CONFIG_SYS_OCM_DATA_SIZE       0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM     */
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
 
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------