sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / QS823.h

diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index 4ac31b1c0a192608a8f28962fc9776740b46ce89..6733460425b7361be7ed8eced5fb808f5786aafc 100644 (file)
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -8,23 +8,7 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -53,6 +37,8 @@
 #define CONFIG_QS823           1       /* ...on a QS823 module */
 #define CONFIG_SCC2_ENET       1       /* SCC2 10BaseT ethernet */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 /* Select the target clock speed */
 #undef CONFIG_CLOCK_16MHZ              /* cpu=16,777,216 Hz, mem=16Mhz */
 #undef CONFIG_CLOCK_33MHZ              /* cpu=33,554,432 Hz, mem=33Mhz */
@@ -211,7 +197,7 @@
 #define CONFIG_CMD_BOOTD
 #define CONFIG_CMD_CONSOLE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMMAP
@@ -232,10 +218,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt */
 
 #define CONFIG_SYS_HUSH_PARSER         1               /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024            /* Console I/O Buffer Size */
@@ -251,10 +235,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x400000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000            /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -270,9 +250,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00          /* End of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       64              /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00          /* Size of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -562,14 +541,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 #define CONFIG_SYS_OR7_PRELIM          0xFFF00000
 #define CONFIG_SYS_BR7_PRELIM          0xF0700000
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 /*
  * Sanity checks
  */