tricorder: panic() on unknown board

[karo-tx-uboot.git] / include / configs / RPXlite.h

diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index dd9134da1c62c9721b1965bfb9f73a087144961f..ada7e145c07fbe0dcbee8442f4cb85fdc2392b79 100644 (file)
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
@@ -39,6 +23,8 @@
 #define CONFIG_MPC850          1       /* This is a MPC850 CPU         */
 #define CONFIG_RPXLITE         1
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
 #undef CONFIG_8xx_CONS_SMC2
 #undef CONFIG_8xx_CONS_NONE
@@ -60,6 +46,36 @@
 #undef CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
 
 #define CONFIG_BZIP2           /* Include support for bzip2 compressed images  */
+
+/* enable I2C and select the hardware/software driver */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      40000   /* 40 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
+/* Software (bit-bang) I2C driver configuration */
+#define PB_SCL         0x00000020      /* PB 26 */
+#define PB_SDA         0x00000010      /* PB 27 */
+
+#define I2C_INIT       (immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE     (immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE   (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ       ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)   if (bit) \
+                               immr->im_cpm.cp_pbdat |=  PB_SDA; \
+                       else \
+                               immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)   if (bit) \
+                               immr->im_cpm.cp_pbdat |=  PB_SCL; \
+                       else \
+                               immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY      udelay(5)       /* 1/4 I2C clock duration */
+
+/* M41T11 Serial Access Timekeeper(R) SRAM */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+/* play along with the linux driver */
+#define CONFIG_SYS_M41T11_BASE_YEAR 1900
+
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
 /*
@@ -101,8 +117,6 @@
 
 #define        CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -117,9 +131,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -129,7 +142,7 @@
  */
 #define        CONFIG_SYS_SDRAM_BASE           0x00000000
 #define CONFIG_SYS_FLASH_BASE          0xFFC00000
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define        CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 #ifdef CONFIG_BZIP2
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve ~4 MB for malloc()   */
@@ -250,6 +263,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define        CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -335,15 +349,6 @@
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
                         MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */