Update from 2013.01 to 2013.07

[karo-tx-uboot.git] / include / configs / Sandpoint8245.h

diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 84e4891dc9ac19c226d5cf61138975c2a8f8c7e2..97e8968243a5606d5b4cb04528ad1cfcfdb3b362 100644 (file)
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /* ------------------------------------------------------------------------- */
@@ -95,6 +79,7 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI                             /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #undef CONFIG_PCI_PNP
 
 
@@ -171,13 +156,16 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#define CONFIG_HARD_I2C                1               /* To enable I2C support        */
-#undef  CONFIG_SOFT_I2C                                /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_HARD_I2C                1               /* To enable I2C support */
+#undef  CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SPEED   400000
+#define CONFIG_SYS_I2C_SLAVE   0x7F
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #error "Soft I2C is not configured properly.  Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 #define I2C_PORT               3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE             (iop->pdir |=  0x00010000)
 #define I2C_TRISTATE           (iop->pdir &= ~0x00010000)
@@ -187,7 +175,7 @@
 #define I2C_SCL(bit)           if(bit) iop->pdat |=  0x00020000; \
                                else    iop->pdat &= ~0x00020000
 #define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57            /* EEPROM IS24C02               */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1               /* Bytes of address             */