Move setexpr to Kconfig

[karo-tx-uboot.git] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 6b396bb695aa0c950e37eb58eed7d4cdf1fc104f..fd3362f818508aa7d497cb6cd2ad14ef3c093ff5 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -47,7 +47,10 @@
 
 /* support deep sleep */
 #define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_SILENT_CONSOLE
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff40000
@@ -305,7 +308,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -605,14 +607,30 @@ unsigned long get_board_ddr_clk(void);
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
 #define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
-#define CONFIG_SYS_BMAN_NUM_PORTALS    25
+#define CONFIG_SYS_BMAN_NUM_PORTALS    10
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #define CONFIG_SYS_BMAN_MEM_PHYS       0xff4000000ull
 #define CONFIG_SYS_BMAN_MEM_SIZE       0x02000000
-#define CONFIG_SYS_QMAN_NUM_PORTALS    25
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
+                                       CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
+#define CONFIG_SYS_QMAN_NUM_PORTALS    10
 #define CONFIG_SYS_QMAN_MEM_BASE       0xf6000000
 #define CONFIG_SYS_QMAN_MEM_PHYS       0xff6000000ull
 #define CONFIG_SYS_QMAN_MEM_SIZE       0x02000000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
+                                       CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
@@ -673,6 +691,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
+/* Enable VSC9953 L2 Switch driver */
+#define CONFIG_VSC9953
+#define CONFIG_VSC9953_CMD
+#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR       0x14
+#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR       0x18
+
 /*
  * Dynamic MTD Partition support with mtdparts
  */
@@ -712,7 +736,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SETEXPR
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI