Merge branch 'master' of git://git.denx.de/u-boot-microblaze

[karo-tx-uboot.git] / include / configs / TOP5200.h

diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 046948e74600c5a265f407c4e68bb711b2328388..2267d59d750000596defa8695b0fce49ae25df35 100644 (file)
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -45,10 +45,15 @@
 #define CONFIG_MPC5200         1       /* More exactly a MPC5200 */
 #define CONFIG_TOP5200         1       /* ... on TOP5200 board - we need this for FEC.C */
 
-#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
+/*
+ * allowed and functional CONFIG_SYS_TEXT_BASE values:
+ * 0xff000000  low boot at 0x00000100 (default board setting)
+ * 0xfff00000  high boot at 0xfff00100 (board needs modification)
+ * 0x00100000  RAM load and test
+ */
+#define        CONFIG_SYS_TEXT_BASE    0xff000000
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
@@ -138,11 +143,11 @@
 /*
  * MUST be low boot - HIGHBOOT is not supported anymore
  */
-#if (TEXT_BASE == 0xFF000000)          /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)               /* Boot low with 16 MB Flash */
 #   define CONFIG_SYS_LOWBOOT          1
 #   define CONFIG_SYS_LOWBOOT16        1
 #else
-#   error "TEXT_BASE must be 0xff000000"
+#   error "CONFIG_SYS_TEXT_BASE must be 0xff000000"
 #endif
 
 /*
@@ -292,14 +297,13 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -312,7 +316,7 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC5xxx_FEC     1
-#define CONFIG_FEC_10MBIT      1               /* Workaround for FEC 100Mbit problem */
+#define CONFIG_MPC5xxx_FEC_MII10       /* Workaround for FEC 100Mbit problem */
 #define        CONFIG_PHY_ADDR         0x1f
 #define        CONFIG_PHY_TYPE         0x79c874
 /*