CONFIGS: peach-pit: Enable display for peach_pit board

[karo-tx-uboot.git] / include / configs / VCMA9.h

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 5cc8ece7de6672d6142697c3c400bee434b6ae34..d40185e1e2c67433a39f1ef06a5c8997b884cd28 100644 (file)
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -7,23 +7,7 @@
  *
  * Configuation settings for the MPL VCMA9 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -49,8 +33,6 @@
 /* input clock of PLL (VCMA9 has 12MHz input clock) */
 #define CONFIG_SYS_CLK_FREQ    12000000
 
-#undef CONFIG_USE_IRQ          /* we don't need IRQ/FIQ stuff */
-
 #define CONFIG_CMDLINE_TAG     /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -79,11 +61,11 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #define CONFIG_CMDLINE_EDITING
 
 /*
@@ -91,12 +73,12 @@
  * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
  * address 0x50 with 16bit addressing
  */
-#define CONFIG_HARD_I2C                                /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F    /* I2C slave addr */
+#define CONFIG_SYS_I2C
 
 /* we use the built-in I2C controller */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000 /* I2C speed */
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F   /* I2C slave addr */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -127,6 +109,7 @@
 
 /* USB support (currently only works with D-cache off) */
 #define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
@@ -155,8 +138,6 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE           115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */
@@ -169,8 +150,7 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-/* to be activated as soon as s3c24x0 has print_cpuinfo support */
-/*#define CONFIG_DISPLAY_CPUINFO*/                     /* Display cpu info */
+#define CONFIG_DISPLAY_CPUINFO                         /* Display cpu info */
 #define CONFIG_DISPLAY_BOARDINFO                       /* Display board info */
 
 #define CONFIG_SYS_MEMTEST_START       0x30000000      /* memtest works on */
@@ -180,10 +160,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x30800000
 
 /* we configure PWM Timer 4 to 1ms 1000Hz  */
-#define CONFIG_SYS_HZ                  1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* support additional compression methods */
 #define CONFIG_BZIP2
@@ -196,16 +172,6 @@
 #define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \
                            "MEV-10080-001 " VERSION_TAG
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 * 1024)      /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 * 1024)      /* FIQ stack */
-#endif
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1           0x30000000      /* SDRAM Bank #1 */