Merge branch 'karo-tx-uboot' into kc-merge

[karo-tx-uboot.git] / include / configs / adp-ag101p.h

diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index ffc70a630b2ba198351689fc8e18419d7d491ad2..24904b0b7c3c39507ce146ab401edf2256f74174 100644 (file)
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -3,22 +3,7 @@
  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,6 +20,13 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG                     /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS       /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG                      /* send initrd params */
+
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_MEM_REMAP
 #endif
@@ -48,12 +40,6 @@
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ          1000
 #define CONFIG_SYS_CLK_FREQ    39062500
 #define VERSION_CLOCK          CONFIG_SYS_CLK_FREQ
 
@@ -100,9 +86,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    -4
 #define CONFIG_SYS_NS16550_CLK         ((18432000 * 20) / 25)  /* AG101P */
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Ethernet
  */
@@ -119,7 +102,9 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FTSDC010
 #define CONFIG_FTSDC010_NUMBER         1
+#define CONFIG_FTSDC010_SDIO
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 
 /*
  * Command line configuration.
@@ -147,24 +132,12 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*
  * Size of malloc() pool
  */
 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 #define CONFIG_SYS_MALLOC_LEN          (512 << 10)
 
-/*
- * size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE       128
-
 /*
  * AHB Controller configuration
  */
@@ -246,6 +219,10 @@
 #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE   |      \
                                         CONFIG_SYS_FTSDMC021_BANK0_BASE)
 
+#define CONFIG_SYS_FTSDMC021_BANK1_BASE        \
+       (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
+#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE   |      \
+                                        CONFIG_SYS_FTSDMC021_BANK1_BASE)
 #endif
 
 /*
@@ -259,9 +236,12 @@
 #else  /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 #define PHYS_SDRAM_0           0x10000000      /* SDRAM Bank #1 */
 #endif
+#define PHYS_SDRAM_1 \
+       (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 
-#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS   2               /* we have 2 bank of DRAM */
 #define PHYS_SDRAM_0_SIZE      0x04000000      /* 64 MB */
+#define PHYS_SDRAM_1_SIZE      0x04000000      /* 64 MB */
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_0