Merge branch 'karo-tx-uboot' into kc-merge

[karo-tx-uboot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 5c6169771c1a7eaeb40a9397a974d848a5e52e04..190ef0e71bfbeaf9441e701cd65146ddc6e5b4f0 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -17,8 +17,8 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_AM3517EVM 1       /* working with AM3517EVM */
+#define CONFIG_OMAP_COMMON
 
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
@@ -56,6 +56,11 @@
  * Hardware drivers
  */
 
+/*
+ * OMAP GPIO configuration
+ */
+#define CONFIG_OMAP_GPIO
+
 /*
  * NS16550 Configuration
  */
@@ -135,13 +140,23 @@
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
+
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT         10
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -230,7 +245,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           OMAP34XX_GPT2
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -244,25 +258,19 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors */
                                                /* on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_ENV_IS_IN_NAND          1
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
@@ -293,7 +301,6 @@
                                         GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
@@ -306,8 +313,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
@@ -334,6 +341,7 @@
                                                10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000