karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / axs101.h

diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index 8d03110efd56e85dae9082b4602c8842192ac983..7cb885323aa17207f72d2331d799ec95a3d44e89 100644 (file)
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -10,23 +10,8 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER             3
-#define CONFIG_SYS_CACHELINE_SIZE      32
-#define CONFIG_SYS_CLK_FREQ            750000000
 #define CONFIG_SYS_TIMER_RATE          CONFIG_SYS_CLK_FREQ
 
-/* dwgmac doesn't work with D$ enabled now */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is in RAM already */
-
-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define ARC_FPGA_PERIPHERAL_BASE       0xE0000000
 #define ARC_APB_PERIPHERAL_BASE                0xF0000000
 #define ARC_DWMMC_BASE                 (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
@@ -35,12 +20,11 @@
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE           0x81000000
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE          0x10000000      /* 256 Mb */
+#define CONFIG_SYS_SDRAM_SIZE          0x20000000      /* 512 Mb */
 
 #define CONFIG_SYS_INIT_SP_ADDR                \
        (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
@@ -49,6 +33,12 @@
 #define CONFIG_SYS_BOOTM_LEN           0x2000000       /* 32 MB */
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
 
+/*
+ * This board might be of different versions so handle it
+ */
+#define CONFIG_BOARD_TYPES
+#define CONFIG_BOARD_EARLY_INIT_F
+
 /*
  * NAND Flash configuration
  */
@@ -83,12 +73,15 @@
 /*
  * I2C configuration
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
 #define CONFIG_I2C_ENV_EEPROM_BUS      2
 #define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_SPEED1          100000
+#define CONFIG_SYS_I2C_SPEED2          100000
 #define CONFIG_SYS_I2C_SLAVE           0
+#define CONFIG_SYS_I2C_SLAVE1          0
+#define CONFIG_SYS_I2C_SLAVE2          0
 #define CONFIG_SYS_I2C_BASE            0xE001D000
 #define CONFIG_SYS_I2C_BASE1           0xE001E000
 #define CONFIG_SYS_I2C_BASE2           0xE001F000
@@ -123,16 +116,11 @@
 /*
  * Ethernet configuration
  */
-#define CONFIG_DESIGNWARE_ETH
 #define CONFIG_DW_AUTONEG
-#define CONFIG_DW_SEARCH_PHY
-#define CONFIG_NET_MULTI
 
 /*
  * Command line configuration
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
@@ -167,7 +155,6 @@
  * Console configuration
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT              "AXS# "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \