Exynos5420: Introduce support for the Peach-Pit board

[karo-tx-uboot.git] / include / configs / bf518f-ezbrd.h

diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h
index 77b94a8baf9939e62d376285df7927d9d4a898ab..9e374c4024498a034e2e88b52b9bcf1c28e3f8e8 100644 (file)
--- a/include/configs/bf518f-ezbrd.h
+++ b/include/configs/bf518f-ezbrd.h
@@ -5,7 +5,7 @@
 #ifndef __CONFIG_BF518F_EZBRD_H__
 #define __CONFIG_BF518F_EZBRD_H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 
 /*
@@ -53,7 +53,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL        (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
 #define CONFIG_EBIU_AMBCTL1_VAL        (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN  (384 * 1024)
 
 
@@ -63,14 +63,33 @@
 #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
+#define CONFIG_BFIN_MAC_PINS \
+       { \
+       P_MII0_ETxD0, \
+       P_MII0_ETxD1, \
+       P_MII0_ETxD2, \
+       P_MII0_ETxD3, \
+       P_MII0_ETxEN, \
+       P_MII0_TxCLK, \
+       P_MII0_PHYINT, \
+       P_MII0_COL, \
+       P_MII0_ERxD0, \
+       P_MII0_ERxD1, \
+       P_MII0_ERxD2, \
+       P_MII0_ERxD3, \
+       P_MII0_ERxDV, \
+       P_MII0_ERxCLK, \
+       P_MII0_CRS, \
+       P_MII0_MDC, \
+       P_MII0_MDIO, \
+       0 }
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf518f-ezbrd
 #define CONFIG_PHY_ADDR                3
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
-
+#define CONFIG_LIB_RAND
 
 /*
  * Flash Settings
@@ -88,8 +107,9 @@
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ  30000000
-#define CONFIG_SF_DEFAULT_HZ   30000000
+#define CONFIG_SF_DEFAULT_SPEED        30000000
 #define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
 #define CONFIG_SPI_FLASH_STMICRO
 
 
@@ -108,7 +128,7 @@
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x2000
 #endif
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
 
 /*
@@ -116,14 +136,13 @@
  */
 #define CONFIG_BFIN_TWI_I2C    1
 #define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
 
 
 /*
  * SDH Settings
  */
 #if !defined(__ADSPBF512__)
+#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_BFIN_SDH
 #endif
@@ -132,16 +151,15 @@
 /*
  * Misc Settings
  */
+#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
 
 /*
  * Pull in common ADI header for remaining command/environment setup
  */
 #include <configs/bfin_adi_common.h>
 
-#include <asm/blackfin-config-post.h>
-
 #endif