avr32: delete non generic board mimc200

[karo-tx-uboot.git] / include / configs / bf533-ezkit.h

diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 37a70592f8b42f896fe7155d6c018d45d593bb7b..1b7290e8d74c483904304baf73c7c21e29d30583 100644 (file)
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -65,7 +65,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20310300
 #define SMC91111_EEPROM_INIT() \
@@ -76,8 +75,6 @@
                SSYNC(); \
        } while (0)
 #define CONFIG_HOSTNAME                bf533-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
 
 
 /*
@@ -94,51 +91,17 @@
 
 /*
  * I2C Settings
- * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
  */
-#define CONFIG_SOFT_I2C
-#ifdef CONFIG_SOFT_I2C
-#define PF_SCL PF0
-#define PF_SDA PF1
-#define I2C_INIT \
-       do { \
-               *pFIO_DIR |= PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_ACTIVE \
-       do { \
-               *pFIO_DIR |= PF_SDA; \
-               *pFIO_INEN &= ~PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_TRISTATE \
-       do { \
-               *pFIO_DIR &= ~PF_SDA; \
-               *pFIO_INEN |= PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
 #endif
 
-
 /*
  * Misc Settings
  */
@@ -146,7 +109,6 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */