sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / bf561-acvilon.h

diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
index 0be170c3ee8ed41e7e6e2ba8883aa7d684195c48..3db917e37bc296fee647aafffa215d9324e140a4 100644 (file)
--- a/include/configs/bf561-acvilon.h
+++ b/include/configs/bf561-acvilon.h
@@ -12,8 +12,8 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU                                bf561-0.5
-#define CONFIG_BFIN_BOOT_MODE          BFIN_BOOT_BYPASS
+#define CONFIG_BFIN_CPU             bf561-0.5
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
 /*
@@ -53,7 +53,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL                0xffc2ffc2
 #define CONFIG_EBIU_AMBCTL1_VAL                0x99b35554
 
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (384 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (128 * 1024)
 
 
@@ -76,7 +76,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK                       1
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
@@ -131,7 +130,6 @@
 #define CONFIG_ENV_SECT_SIZE           (1056 * 8)
 #define CONFIG_ENV_OFFSET                      ((16 + 256) * 1056)
 #define CONFIG_ENV_SIZE                                (8 * 1056)
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 
 
 /*
@@ -145,7 +143,6 @@
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
-#define BFIN_NAND_READY     PF10
 #define BFIN_NAND_WRITE(addr, cmd) \
        do { \
                bfin_write8(addr, cmd); \
@@ -154,12 +151,7 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-       do { \
-               bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \
-               bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \
-       } while (0)
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF10
 
 
 /*
@@ -168,7 +160,7 @@
 #define CONFIG_UART_CONSOLE                    0
 #define CONFIG_BAUDRATE                                57600
 #define CONFIG_SYS_PROMPT "Acvilon> "
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
 
 /*
  * Pull in common ADI header for remaining command/environment setup