karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / canyonlands.h

diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8eeb15c0e10898ba7115fa989f6d8f658cfd8e06..ed790ccaf3a83594273d36ae86f25a5700b8584f 100644 (file)
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -11,6 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
+
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
@@ -19,10 +21,10 @@
  * and Arches dual (460GT)
  */
 #ifdef CONFIG_CANYONLANDS
-#define CONFIG_460EX           1       /* Specific PPC460EX            */
+#define CONFIG_460EX                   /* Specific PPC460EX            */
 #define CONFIG_HOSTNAME                canyonlands
 #else
-#define CONFIG_460GT           1       /* Specific PPC460GT            */
+#define CONFIG_460GT                   /* Specific PPC460GT            */
 #ifdef CONFIG_GLACIER
 #define CONFIG_HOSTNAME                glacier
 #else
@@ -32,7 +34,7 @@
 #endif
 #endif
 
-#define CONFIG_440             1
+#define CONFIG_440
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xFFF80000
@@ -45,10 +47,10 @@
 
 #define CONFIG_SYS_CLK_FREQ    66666667        /* external freq to pll */
 
-#define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_early_init_f */
-#define CONFIG_BOARD_EARLY_INIT_R      1       /* Call board_early_init_r */
-#define CONFIG_MISC_INIT_R             1       /* Call misc_init_r */
-#define CONFIG_BOARD_TYPES             1       /* support board types */
+#define CONFIG_BOARD_EARLY_INIT_F              /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R              /* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R                     /* Call misc_init_r */
+#define CONFIG_BOARD_TYPES                     /* support board types */
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -134,7 +136,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_FLASH_CFI                   /* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER                /* Use common CFI driver        */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1       /* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */
 
 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 #define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
@@ -172,9 +174,9 @@
  * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
  * code.
  */
-#define CONFIG_SPD_EEPROM      1       /* Use SPD EEPROM for setup     */
+#define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for setup     */
 #define SPD_EEPROM_ADDRESS     {0x50, 0x51}    /* SPD i2c spd addresses*/
-#define CONFIG_DDR_ECC         1       /* with ECC support             */
+#define CONFIG_DDR_ECC                 /* with ECC support             */
 #define CONFIG_DDR_RQDC_FIXED  0x80000038 /* fixed value for RQDC      */
 
 #else /* defined(CONFIG_ARCHES) */
@@ -262,8 +264,8 @@
 #define CONFIG_4xx_CONFIG_BLOCKSIZE            16
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)                      */
-#define CONFIG_DTT_LM75                1               /* ON Semi's LM75       */
-#define CONFIG_DTT_AD7414      1               /* use AD7414           */
+#define CONFIG_DTT_LM75                                /* ON Semi's LM75       */
+#define CONFIG_DTT_AD7414                      /* use AD7414           */
 #define CONFIG_DTT_SENSORS     {0}             /* Sensor addresses     */
 #define CONFIG_SYS_DTT_MAX_TEMP        70
 #define CONFIG_SYS_DTT_LOW_TEMP        -30
@@ -275,14 +277,14 @@
 
 #if !defined(CONFIG_ARCHES)
 /* RTC configuration */
-#define CONFIG_RTC_M41T62      1
+#define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR        0x68
 #endif
 
 /*-----------------------------------------------------------------------
  * Ethernet
  *----------------------------------------------------------------------*/
-#define CONFIG_IBM_EMAC4_V4    1
+#define CONFIG_IBM_EMAC4_V4
 
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
@@ -322,9 +324,9 @@
 #define CONFIG_GPCS_PHY2_ADDR   0xC
 #endif /* !defined(CONFIG_ARCHES) */
 
-#define CONFIG_PHY_RESET       1       /* reset phy upon startup       */
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_PHY_DYNAMIC_ANEG        1
+#define CONFIG_PHY_RESET               /* reset phy upon startup       */
+#define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG
 
 /*-----------------------------------------------------------------------
  * USB-OHCI