]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/cm-bf537e.h
Merge branch 'master' of git://git.denx.de/u-boot-usb
[karo-tx-uboot.git] / include / configs / cm-bf537e.h
index 742df9c0199159fe6b4b9399d7d27ac3323935ac..e05956846c92436ae2281605807fc068d9e8b0b8 100644 (file)
@@ -55,7 +55,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL        (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL        (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN  (128 * 1024)
 
 
 #ifndef __ADSPBF534__
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
+#define CONFIG_SMC911X         1
+#define CONFIG_SMC911X_BASE    0x20308000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                cm-bf537e
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
-
+#define CONFIG_LIB_RAND
 
 /*
  * Flash Settings
 #define CONFIG_SYS_MAX_FLASH_SECT      35
 
 
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ  30000000
+
+
 /*
  * Env Storage Settings
  */
 #define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET      0x4000
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_OFFSET      0x8000
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE   0x8000
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       arch/blackfin/cpu/traps.o               (.text .text.*); \
-       arch/blackfin/cpu/interrupt.o   (.text .text.*); \
-       arch/blackfin/cpu/serial.o              (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib/crc32.o             (.text .text.*); \
+       arch/blackfin/lib/built-in.o (.text*); \
+       arch/blackfin/cpu/built-in.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C    1
-#define CONFIG_HARD_I2C                1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
+
+
+/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
 
 
 /*
 #define CONFIG_UART_CONSOLE    0
 #define CONFIG_BOOTCOMMAND     "run flashboot"
 #define FLASHBOOT_ENV_SETTINGS \
-       "flashboot=flread 20040000 1000000 300000;" \
+       "flashboot=flread 20040000 1000000 3c0000;" \
        "bootm 0x1000000\0"
-
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 /*
  * Pull in common ADI header for remaining command/environment setup