karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / cm5200.h

diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 54cf40d67fc52a9611ffedd15f55b169f5b08401..4607d9f6bc8ee46c660c57f08af5443e3f33da22 100644 (file)
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -2,42 +2,30 @@
  * (C) Copyright 2003-2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
+
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_CM5200          1       /* ... on CM5200 platform */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfc000000
+
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
  * Supported commands
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
@@ -47,7 +35,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
@@ -78,7 +65,9 @@
 #define CONFIG_POST            (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
 #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
 /* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST          { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM }
+#define CONFIG_SYS_POST_I2C_ADDRS      {CONFIG_SYS_I2C_SLAVE,  \
+                                        CONFIG_SYS_I2C_IO,     \
+                                        CONFIG_SYS_I2C_EEPROM}
 
 /* display image timestamps */
 #define CONFIG_TIMESTAMP       1
@@ -158,18 +147,17 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_POST_SIZE
 #else
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE
 #endif
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_BOARD_TYPES     1       /* we use board_type */
 
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (384 << 10)     /* 384 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (256 << 10)     /* 256 kB for malloc() */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* initial mem map for Linux */
@@ -223,6 +211,8 @@
  * MTD configuration
  */
 #define CONFIG_CMD_MTDPARTS    1
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=cm5200-0"
 #define MTDPARTS_DEFAULT       "mtdparts=cm5200-0:"                    \
                                        "384k(uboot),128k(env),"        \
@@ -294,7 +284,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            1       /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
@@ -307,7 +296,6 @@
 #define CONFIG_LOOPW           1
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
@@ -315,9 +303,6 @@
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #define CONFIG_SYS_XLB_PIPELINING      1       /* enable transaction pipeling */
 
 /*