karo: tx6: fix definition of CONFIG_IPUV3_CLK

[karo-tx-uboot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 726714dd2118f8c193d8921406c385d3adf15d5d..39a216e8352e1b226115216b5baa110d36280a7f 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -11,22 +11,7 @@
  *
  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -135,12 +120,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 #define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
 #define MTDPARTS_DEFAULT       "mtdparts=nand:512k(x-loader),"\
-                               "1920k(u-boot),128k(u-boot-env),"\
+                               "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
@@ -182,14 +167,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY               10
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -204,9 +181,9 @@
        "defaultdisplay=dvi\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext3 rootwait\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
-       "nandrootfstype=jffs2\0" \
+       "nandrootfstype=ubifs\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
@@ -232,7 +209,7 @@
                "bootm ${loadaddr}\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${loadaddr} 280000 400000; " \
+               "nand read ${loadaddr} 2a0000 400000; " \
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
@@ -347,6 +324,5 @@
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
-#define CONFIG_SPLASH_SCREEN_PREPARE
 
 #endif /* __CONFIG_H */