Merge branch 'iu-boot/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index e6aef7b595762bca4995ae55b7bfb7913ae76936..516ef7f3015a2d81c18147943dedad5416c3a6c4 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -11,22 +11,7 @@
  *
  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -38,7 +23,9 @@
 #define CONFIG_OMAP    /* in a TI OMAP core */
 #define CONFIG_OMAP34XX        /* which is a 34XX */
 #define CONFIG_OMAP_GPIO
+#define CONFIG_CMD_GPIO
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
+#define CONFIG_OMAP_COMMON
 
 #define CONFIG_SYS_TEXT_BASE   0x80008000
 
@@ -135,12 +122,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 #define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
 #define MTDPARTS_DEFAULT       "mtdparts=nand:512k(x-loader),"\
-                               "1920k(u-boot),128k(u-boot-env),"\
+                               "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
@@ -182,16 +169,8 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
-
 /* Environment information */
-#define CONFIG_BOOTDELAY               10
+#define CONFIG_BOOTDELAY               3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -204,9 +183,9 @@
        "defaultdisplay=dvi\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext3 rootwait\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
-       "nandrootfstype=jffs2\0" \
+       "nandrootfstype=ubifs\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
@@ -232,7 +211,7 @@
                "bootm ${loadaddr}\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${loadaddr} 280000 400000; " \
+               "nand read ${loadaddr} 2a0000 400000; " \
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
@@ -280,7 +259,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -331,6 +309,8 @@
 #define STATUS_LED_BOOT                        STATUS_LED_BIT
 #define GREEN_LED_GPIO                 186 /* CM-T35 Green LED is GPIO186 */
 
+#define CONFIG_SPLASHIMAGE_GUARD
+
 /* GPIO banks */
 #ifdef CONFIG_STATUS_LED
 #define CONFIG_OMAP3_GPIO_6    /* GPIO186 is in GPIO bank 6  */
@@ -342,5 +322,8 @@
 #define LCD_BPP                LCD_COLOR16
 
 #define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
 
 #endif /* __CONFIG_H */